Verilink SCM (880-503300-001) Product Manual - Manual (Page 45)

Administration Menu
Verilink SCM 4-7
Figure 4-5 DATA LINK LAYER REMOTE CONFIGURATION
The Data Link Layer Remote Configuration Menu lists the nodes
that may be accessed. Typing “u” and the port number with the
inband link updates the SCM node selection table.
For remote management, the inband field must show y/y. If it does
not, use the local B) Inband option to adjust the remote end, then
go to the module’s Configuration Menu to adjust the local
module’s inband status.
Node Selection Nodes are accessed from the SCM Node Management Menu by
typing “S” and the node number.
Figure 4-6 SCM Node Management Menu
-- DATA LINK LAYER REMOTE CONFIGURATION -- -- DATA LINK LAYER REMOTE CONFIGURATION -- -- DATA LINK LAYER REMOTE CONFIGURATION -- -- DATA LINK LAYER REMOTE CONFIGURATION --
Port Node Address Node Id Inband Port Node Address Node Id Inband Port Node Address Node Id Inband Port Node Address Node Id Inband
No physical link No physical link No physical link No physical link
No physical link No physical link No physical link No physical link
No physical link No physical link No physical link No physical link
4 0.0.0.3 17 y/y 4 0.0.0.3 17 y/y 4 0.0.0.3 17 y/y 4 0.0.0.3 17 y/y
Bn) inband An) node address Bn) inband An) node address Bn) inband An) node address Bn) inband An) node address
In) node id Un) update SCM node table In) node id Un) update SCM node table In) node id Un) update SCM node table In) node id Un) update SCM node table
X) exit this menu X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.55] [1,12] QUAD T1 > A [0.0.0.55] [1,12] QUAD T1 > A [0.0.0.55] [1,12] QUAD T1 > A [0.0.0.55] [1,12] QUAD T1 >
-- SCM NODE MANAGEMENT MENU -- -- SCM NODE MANAGEMENT MENU -- -- SCM NODE MANAGEMENT MENU -- -- SCM NODE MANAGEMENT MENU --
Node Address Node id Site name Node Address Node id Site name Node Address Node id Site name Node Address Node id Site name
Local Node
Local Node Local Node Local Node
0 0.0.0.2 122 SCM Tutorial
0 0.0.0.2 122 SCM Tutorial 0 0.0.0.2 122 SCM Tutorial 0 0.0.0.2 122 SCM Tutorial
Remote Nodes Remote Nodes Remote Nodes Remote Nodes
1 0.0.0.3 17
1 0.0.0.3 17 1 0.0.0.3 17 1 0.0.0.3 17
A) add node Dn) delete node A) add node Dn) delete node A) add node Dn) delete node A) add node Dn) delete node
L) list nodes Sn) select/manage node
L) list nodes Sn) select/manage node L) list nodes Sn) select/manage node L) list nodes Sn) select/manage node
X) exit this menu
X) exit this menu X) exit this menu X) exit this menu
Note: Selection of a remote node shifts the viewpoint Note: Selection of a remote node shifts the viewpoint Note: Selection of a remote node shifts the viewpoint Note: Selection of a remote node shifts the viewpoint
to the main menu of that node.
to the main menu of that node. to the main menu of that node. to the main menu of that node.
A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM >