Viante CUC-25PM Pasta Maker Instruction Manual - Manual (Page 2)

1
Viante is very safety conscious.
We ask that you exercise a degree of care when using any electrial appliance and adhere to the following
precautions:
IMPORTANT SAFEGUARDS FOR YOUR VIANTE PASTA MAKER
Carefully read all instructions before operating
the Pasta Maker and save for future reference.
Remove and safely discard any packaging
material and promotional labels before using
the Pasta Maker for the first time.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted over the pins of the
power plug when unpacking this Pasta
Maker for the first time.
Do not place the Pasta Maker near the
edge of a bench top, counter or table during
operation. Ensure the surface is level, clean
and free of water, flour and other substances.
Do not place this Pasta Maker on or near a
hot gas or electric burner, or where it could
touch a heated oven.
Do not place any part of the Pasta Maker in
a gas, electric or microwave oven or on a hot
gas or electric burner.
The Pasta Maker is not intended to be
operated by means of an external timer or
separate remote control system.
Do not use the Pasta Maker on a sink drain
board
Do not leave the Pasta Maker unattended
when in use.
Do not attempt to operate the Pasta Maker
by any method other than those described in
this booklet.
Always ensure the Pasta Maker is
completely assembled before operating. The
Pasta Maker will not operate unless properly
assembled.
Do not use attachments other than those
provided with the Pasta Maker.
•
•
•
•
•
•
•
•
•
•
•
•
Ensure the on/off switch has been pressed
to the off position, and the Pasta Maker
is switched off at the power outlet and
unplugged before assembling.
Vibration during operation may cause the
Pasta Maker to move.
Do not push food into the extrusion chamber
with your fingers or other utensils.
Do not place hands, fingers or utensils in the
mixing bin of the Pasta Maker unless the
motor and mixing paddle have come to a
complete stop. Ensure the ON/OFF switch has
been pressed to off and the Pasta Maker
is switched off at the power outlet and
unplugged before removing the mixing bin lid
from the mixing bin.
Ensure the motor and the mixing paddle have
completely stopped before disassembling.
Ensure the ON/OFF switch has been pressed
to off and the appliance is switched off at the
power outlet and unplugged when not in use,
if left unattended and before disassembling,
cleaning or storing.
Do not move the Pasta Maker while in
operation.
Do not remove the mixing chamber from the
motor base whilst in operation.
Ensure care is taken when emptying the
mixing chamber and cleaning the mixing
chamber.
Do not use harsh abrasive or caustic cleaners
when cleaning this Pasta Maker.
•
•
•
•
•
•
•
•
•
•