Extron electronic Distribution Amplifiers DVI DA6 Plus - Manual (Page 11)

DVI DA Plus Series • Introduction 1-3
DVI DA Plus Series Features
EDID Minder — The EDID Minder maintains continuous EDID
(Extended Display Identification Data) communication with
the attached source. This ensures that the DVI source powers
up correctly and maintains a proper video output, even if the
display is off.
High Resolution DVI-D input — The distribution amplifiers
accept one single link DVI-D input, with a resolution range up
to 1920 x 1200 or 1080p @ 60 Hz.
Input Equalization — Input Equalization (EQ) conditions the
input signals to ensure the integrity of the signals delivered to
the output devices.
DVI-D outputs —
The units distribute four (DVI DA4 Plus),
six (DVI DA6 Plus), or eight (DVI DA8 Plus) single link DVI-D
output signals simultaneously, at resolutions up to 1920 x 1200
or 1080p @ 60 Hz.
N The actual signal transmission distance can vary greatly
and depends on signal resolution, cable type, cable
quality, graphics card and the display used in the system.
External power supply — All three models are powered by
external 12 VDC power supply (provided with the units).
Power on Pin 14 —
The distribution amplifiers are able to
provide a 5 VDC (250 mA) output.
Front Panel Indicator LED —
The LED light on the front panel
provides feedback about power status and whether an input
signal is detected.
Versatile mounting options —
All three units can be mounted
in a rack, under a desk or set on a tabletop.