Quick start guide — dvi da plus series, cont’d, Step 3: connect dvi cables, Step 4: apply power – Extron electronic Distribution Amplifiers DVI DA6 Plus User Manual
Page 6: Dvi da plus series • quick start guide, Qs-2, Extron dvi da8 plus
DVI DA Plus Series • Quick Start Guide
Quick Start Guide — DVI DA Plus Series, cont’d
QS-2
Step 3: Connect DVI Cables
Connect a DVI cable from the Input connector to the video
source device (see page 2-9).
Connect a DVI cable from the distribution amplifier to the desired
display device(s) (see page 2-9).
12V
0.4A
MA
X
POWE
R
DVI-D INPU
T
DVI-D OUTPU
T
1
2
3
4
5
6
7
8
DVI DA8 Plus
Computer
with
DVI Output
Local
Monitor
Display
with
DVI Input
Display
with
DVI Input
Extron
DVI DA8 Plus
Distribution Amplifier
Step 4: Apply Power
Power on the display device(s).
Power on the distribution amplifier.
Power on the source input device.
N
For the distribution amplifier's EDID Minder feature to work
correctly, the distribution amplifier and all the display devices
must be powered on before the source device is booted up.