Rear panel features, Dvi da plus series • installation and operation – Extron electronic Distribution Amplifiers DVI DA6 Plus User Manual
Page 19
DVI DA Plus Series • Installation and Operation
2-7
Rear Panel Features
The rear panels for the DVI DA4 Plus (top panel), the DVI DA6
Plus (middle panel), and DVI DA8 Plus (bottom panel) are
shown below:
12V
1.0A MAX
POWER
DVI-D INPUT
DVI-D OUTPUT
1
2
3
4
DVI DA4 Plus
2
3
4
12V
1.5A MAX
POWER
DVI-D INPUT
DVI-D OUTPUT
1
2
3
4
5
6
7
8
DVI DA8 Plus
12V
1.5A MAX
POWER
DVI-D INPUT
DVI-D OUTPUT
1
2
3
4
5
6
DVI DA6 Plus
2
3
4
Rear panel features
b
Power input — Connect the external power supply (provided)
to the 3.5 mm, 2-pole captive screw power receptacle.
c
Input connector — Connect the input signal to the female DVI-I
connector. The DVI input signal is equalized to ensure integrity.
d
Output Connectors — Connect up to four (DVI DA4 Plus),
six (DVI DA6 Plus) or eight (DVI DA8 Plus) DVI-D outputs to
display devices, using the female DVI-I connectors.
N
Although these distribution amplifiers have DVI-I
connectors, they are only compatible with single-link
DVI-D video signals.
N
The DVI DA Plus series distribution amplifiers are not
HDCP compliant.