Extron electronic Distribution Amplifiers DVI DA6 Plus - Manual (Page 21)

DVI DA Plus Series • Installation and Operation 2-9
Input cable connections
Connect a single link DVI-D source device, with a resolution
range up to 1920 x1200 or 1080p @ 60 Hz, to the female DVI-I
input, using a DVI cable.
N Although these distribution amplifiers have DVI-I
connectors, they are only compatible with single-link
DVI-D video signals.
Input EQ conditions input signals to ensure the integrity of the
signals delivered to the output devices.
Output cable connections
Use DVI-I cables to connect up to four (DVI DA4 Plus),
six (DVI DA6 Plus) or eight (DVI DA8 Plus) display devices.
N The actual signal transmission distance can vary and
depends on signal resolution, cable quality, graphics
card, and display used in the system.