Wavetronix Command DataView (CMD-DV) - Quick-reference Guide - Manual (Page 4)

© 2014 Wavetronix LLC. All rights reserved. Protected by US Pat. Nos. 6,556,916; 6,693,557; 7,426,450; 7,427,930; 7,573,400; 7,889,097; 7,889,098; 7,924,170; 7,991,542; 8,248,272;
8,665,113; and Cdn. Pat. Nos. 2,461,411; 2,434,756; 2,512,689; and Euro. Pat. Nos. 1435036; 1438702; 1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click,
Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or registered trademarks of their respective hold-
ers. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.
WX-500-0202
7
Publish data
To publish data from a workbook to a published
data source, follow the steps below:
1 Click on Workbooks in the menu bar, open
the Workbooks tab and click on the Publish
link next to the desired workbook.
2 Once on the Publish page, select a published-
data repository from the drop-down list.
3 Choose whether to publish all data or a subset of data (specified by date or station) by clicking on the
corresponding button.
4 Click Publish when the settings are complete.
View published data by clicking on System in the menu bar then opening the Published Data tab.
8
Run a report
DataView allows you to create data reports based on data from either a workbook or a published data
source. To run a report, follow the steps below:
1 Click on Reports in the menu bar and open the Reports tab.
2 Once on the Reports page, select From Workbook or From Published Data; a drop-down list will ap-
pear listing all the available workbooks or published data repositories. Choose a source.
3 Select which stations to include—either All or Manual Select.
4 Using the Time Range controls, set the range for which data from the workbook or published data
source will be processed.
5 Select a template for the
report and set any user-
defined properties, then
click Run Report.
6 The report request will
appear in the Reports
table as either Process-
ing or Complete. When
complete, the table will
update and you can click
on the link, opening
the report in a separate
window.
Once the report is loaded, it can be exported by selecting the report type and clicking Export. Reports can
be exported to a number of different formats, including PDF, Rich Text and Excel.