Welltech Dialogic SS7 Protocols ISUP - Manual (Page 65)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
65
6.6.14 Identification Confirmation
Note: This message is only applicable to ITU-T operation
This primitive is used by ISUP to indicate that a response to an Identification
Request has been received.
Message type
IRS (Identification Confirmation Message)
Mandatory parameters
None
Optional parameters
• MCID response indicators
• Message compatibility information
• Parameter compatibility information
• Calling party number
• Access transport
• Generic number
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).
6.6.15 Information Indication
This primitive is used by the ISUP module to convey additional call
information to the user that was not present in the initial set-up indication.
The primitive may take two forms depending on the information being
indicated.
Subsequent address digits
Note: This message is only applicable to ITU-T operation
This primitive is used by ISUP to indicate subsequent incoming called party
number address digits from the network when overlap signaling is employed.
Message type
SAM (Subsequent Address Message)
Mandatory parameters
• Subsequent number
Optional parameters
None