Westermo GD-01 - Manual (Page 48)

48 6196-2220
Using mode 4 and 5 with +CPBF command and CPBW:
Command example Possible responses Note
AT+CPBF=”Er” +CPBF: 15,”+331290101”, Find ”Er” in phonebook,
145, ”Eric” Display the location
OK
AT+CPBN=2 +CPBN: 5,”+33147658987”, Read the next location,
145, ”Frank” display the following
OK location
AT+CPBF=”Er” +CPBF: 15, ”+331290101”, Find ”Er” in phonebook,
145, ”Eric” display the location
OK
AT+CPBN=4 +CPBF: 15, ”+331290101”, Get the last location read,
145, ”Eric” display the last location
OK read
AT+CPBW=,”0146290800”, Write an item at the first
129,”WM” OK location available, no infor-
mation about this location
AT+CPBN=4 +CPBF: 15, ”+331290101”, Get the last location read,
145,”Eric” display the last location
OK read
AT+CPBN=5 AT+CPBN=38,”0146290800, Display the last item
129,”WM” written with its location
AT+CPBN=4 AT+CPBN=38,”0146290800, Get the last item read,
129,”WM” now the last item read is
the last written item too
AT+CPBF=”800041FFFF” +CPBF: 15,”+3312345”,145, Find”800041” in phone-
”8000414339FFFF” book, Display this loca-
OK tion
AT+CPBN=4 +CPBF: 15,”+3312345”,145, Get the last location read,
”8000414339FFFF” display the last location
OK read
Please note that the AT+CPBN=5 command is useful after an AT+CPBW command used
without a location.
Defined values:
<mode>
0: First item
1: Last item
2: Next valid item in alphabetical order
3: Previous valid item in alphabetical order
4: Last item read (usable only if a read operation has been performed on the
current phonebook since the end of initialization (+WIND: 4))
5: Last item written (usable only if a write operation has been performed on the
current phonebook since the end of initialization (+WIND: 4)).
B A C K