Westermo FD-80 - Manual (Page 9)

9 6630-2281
6.3 Indicators
6.3.1 LED indicators
DIAG: LED 1 sec blinking No transfer of Profibus DP data through
Ethernet.
LED 1/2 sec blinking Transfer of Profibus DP data through
Ethernet.
LED fast flashing FD-Tool configuration mode.
BA: LED on Profibus DP active.
LED off Profibus DP inactive/error.
ER-E: LED 1 x flashing FD-80 can’t receive a link pulse from a
hubport. Check the cable or hub port.
LED 2 x flashing Parity or framing error of internal serial
port. Check serial data format.
LED 3 x flashing Handshake error on internal serial port.
Check the handshake configuration.
Status: LED flashes Whenever there is activity on
Ethernet port.
LED off No activity on Ethernet port.
Power: LED on Correct internal power.
LED off No internal power.
ER-E, Status and Power: LEDs on Self-test error.