Interface specifications – Westermo DR-250 User Manual
Page 10
10
6622-2211
Interface specifications
Power
Rated voltage
10 – 28 VDC
Rated current
1500 mA @ 12 VDC
Rated frequency
DC
RS-232
Electrical specification
RS-232 V.24
Data rate
300 bit/s – 115.2 kbit/s
Data format
7 or 8 data bits, Odd, even or no parity, 1 or 2 stop bits
Transmission range
2 m
Connection
25-pin D-sub female (DCE)
Ethernet
Electrical specification
IEEE std 802.3. 2000 Edition
Data rate
10 Mbit/s or 100 Mbit/s, auto-negotiated
Protocol
UDP, TCP, ICMP, HTTP and ARP
Duplex
Full- or half duplex, auto-negotiated
Circuit type
TNV-1
Transmission range
100 m
Connection
RJ-45 shielded, auto MDI/MDI-X
Antenna (option)
Frequency bands
GSM1800 TX 1710 – 1785 and RX 1805 – 1880 MHz
UMTS2100 TX 1920 – 1980 RX 2110 - 2170
Data rate
CSD: up to 14.4 kbit/s
GPRS: up to 85.6 kbit/s
Connection
SMA female, impedance: 50 ohm
SIM (option)
Electrical specification
3 volts SIM supported