Westermo Lynx-x08-F2G-S2-EX - Manual (Page 18)

18 6643-22701
Connection to console port
The console port can be used to connect to the CLI
(Command Line Interface).
The following steps needs to be taken
1. Connect the serial diagnostic cable to the console port
(use only Westermo cable 1211-2027).
2. Connect cable to your computer (USB port, if drivers are needed they can be downloaded
from our Web page).
3. Use a terminal emulator and connect with correct speed and format (115200, 8N1)
to the assigned port.
For more information about the CLI, see the WeOS management guide.
I/O connection (for details see page 11)
Console port
(for details see page 11 and 15)
Cable 1211-2027
Bottom view
Safety control drawing