Westermo Viper-x12-p8 - Manual (Page 9)

9 6641-2252
Description
Designed for harsh industrial environments
The Viper-12-PoE series is a series of managed rugged Ethernet switches with Power
over Ethernet, designed for applications with severe operating conditions and extreme
environments.
With an ultra robust design, sealed to IP67 and vibration resistant to and exceeding
on-board rail standards these units are ideal for situations where mechanical stress,
moisture, condensation, dirt or continuous vibrations could adversely affect the function
of standard Ethernet switches. Fully approved for onboard rolling stock, these units can
be deployed in e.g. trains, trams, busses, mining trucks, army vehicles and drilling rigs.
Features for complete network management
Our unique FRNT technology is the fastest and most robust protocol on the market
to re-configure a large network in the event of any link or hardware failure. The Viper-
12-PoE series also supports STP/RSTP in case of need for standard protocol. IGMPv2/
v3 with stop filter and the unique Westermo protocol ’Fast Reconnect’ allows a video
stream to reconfigure very fast. Advanced functionality for VLANs with support for up
to 64 virtual networks, combined with real-time properties is implemented in the switch
in order to achieve determinism for real time critical applications.
Made easy and secure configuration
You can safely access your switch from anywhere in the network, or directly to the
product via a console port. The HTTPS secured web configuration interface has been
designed ’Made Easy’, setting up a redundant ring or a VLAN is just a few clicks away. For
more advanced configuration, you will find an SSH encrypted industry standard CLI which
allows extremely detailed settings. For safe handling and MIB readout the switch is also
equipped with SNMPv3.
Product models
There are four different models of the Viper-12-PoE series:
3641-0580 Viper-112-P8 managed switch with Layer 2 SW functions.
3641-0590 Viper-212-P8 managed switch with Layer 3 SW functions.
3641-0570 Viper-112-T3G-P8 managed switch with Layer 2 SW functions and three GigE ports.
3641-0595 Viper-212-T3G-P8 managed switch with Layer 3 SW functions and three GigE ports.