EAW CAM160 User Manual
Page 2
– CAM160 / CAM80
TABLE OF CONTENTS
1. IMPORTANT SAFETY PRECAUTIONS .............................
. INTRODUCTION ..................................................................3
FEATURES ...........................................................................3
APPLICATIONS ...................................................................3
3. FRONT PANEL FEATURES .................................................4
4. REAR PANEL FEATURES ....................................................5
5. THERMAL CONSIDERATIONS ........................................10
6. CONNECTIONS .................................................................10
7. TYPICAL HOOKUP DIAGRAM .......................11
8. SPECIFICATIONS ..............................................................1
BLOCK DIAGRAM .............................................................13
9. SERVICE INFORMATION .................................................14
10. EAW COMMERCIAL WARRANTY ................................15
1. IMPORTANT SAFETY PRECAUTIONS—READ THIS FIRST
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
16. This apparatus shall not be exposed to dripping or splashing, and no
object filled with liquids, such as vases or beer glasses, shall be placed
on the apparatus.
17. This apparatus has been designed with Class-1 construction and must be
connected to a mains socket outlet with a protective earthing connection
(the third grounding prong).
18. This apparatus has been equipped with a single-pole, rocker-style AC
mains power switch. This switch is located on the front panel and should
remain readily accessible to the user.
19. WARNING: Plug the power cord into a power outlet where access
to the power cord connector is readily accessible in case power
disconnection is required.
20. ATTENTION: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1) This device may not
cause harmful interference, and 2) This device must accept any interference
received, including interference that may cause undesired operation.
21. This apparatus does not exceed the Class A/Class B (whichever is applicable)
limits for radio noise emissions from digital apparatus as set out in the radio
interference regulations of the Canadian Department of Communications.
ATTENTION —Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils numériques de
class A/de class B (selon le cas) prescrites dans le règlement sur le brouillage
radioélectrique édicté par les ministere des communications du Canada.
WARNING! This equipment has been designed to be installed by qualified
professionals only! There are many factors to be considered when
installing professional sound reinforcement systems, including mechanical
and electrical considerations, as well as acoustic coverage and
performance. EAW Commercial strongly recommends that this equipment
be installed only by a professional sound installer or contractor.
Part No. 0021209 Rev. C 02/08
© 2007-2008 LOUD Technologies Inc. All Rights Reserved.
CAUTION AVIS
RISK OF ELECTRIC
SHOCK • DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
ATTENTION: POUR EVITER LES RISQUES DE CHOC
ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN
ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER
L'ENTRETIEN AU PERSONNEL QUALIFIE.
AVIS: POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE
A LA PLUIE OU A L'HUMIDITE
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure, that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral est
utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de "voltage
dangereux" non isolé d'ampleur suffisante pour constituer un risque d'éléctrocution.
The exclamation point within an equilateral triangle is intended to alert the user
of the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé pour
alerter les utilisateurs de la présence d'instructions importantes pour le fonction-
nement et l'entretien (service) dans le livret d'instruction accompagnant l'appareil.
PORTABLE CART WARNING
Carts and stands - The
Component should be used
only with a cart or stand
that is recommended by
the manufacturer.
A Component and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the Component and cart
combination to overturn.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
11. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.