ACTi TCM-6630 - Manual (Page 38)

www.acti.com
TCM-6630 Hardware User’s Manual
38

ALARM PIN
The dome provides 8 alarm inputs and 2 outputs ( 1 x N.O. and 1 x N.C.). Select an alarm
connector which you want to set its alarm-related parameters with this item, and then set its
alarm-related parameters in Alarm Setting menu.

ALARM SWITCH
The item is used to enable or disable the selected alarm pin function.

ALARM TYPE
There are two kinds of alarm types: Normal Open and Normal Close, which are illustrated as
below. Select an alarm type that corresponds with the alarm application.

ALARM ACTION
Select one of these modes that choose a kind of actions that should be executed when an
alarm is triggered. The alarm actions can be set to execute the preset position, sequence,
auto-pan or cruise function.

PRESET
Select a preset point where the dome should go when an alarm pin is triggered.
SEQUENCE
Select a sequence line that the speed dome camer should execute when alarm pin is triggered.
The Sequence line should be defined prior in SEQENCE setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin is triggered. The
Auto-pan line can be defined in setup AUTOPAN menu.
CRUISE
Select a cruise line that the speed dome camera should execute when alarm pin is triggered.