ACTi KCM-7111 User Manual
Page 9
Hardware Manual
1) Power Button
Press the Power Button to reboot the camera.
2) Ethernet Port
The Ethernet Port connects to a network using a standard Ethernet cable.
3) Memory Card Slot
Insert a Micro SDHC card here for local recording on the camera.
4) Reset Button
The Reset Button is used to restore the default factory settings of the camera.
Step 1:
Disconnect the power supply.
Step 2:
Press and continue to hold the Reset Button (with a sharp object, like a pen.)
Step 3:
Connect the power supply while keeping the Reset Button pressed.
Step 4:
Wait
for 45 seconds and then release the Reset Button.
5) Digital Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button,etc. Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See
Connecting DI/DO Devices (Optional)
on page 25 for information.
6) DC 12V Power Input
In case the camera is connected to a non-PoE (Power over Ethernet) switch, use this connector
to connect the camera to an external power adapter. See
on page 23 for more information.
7) Audio Input / Output
This connector connects to audio input or output devices, such as a microphone or speaker. See
Connecting Audio In / Out Devices (Optional)
on page 28 for more information.