AEC Colortronic Granulator - M103 - Manual (Page 10)

2-4 Safety Features
Safety Switches
Safety switches at all access covers are wired into the starter control circuit. The machine
cannot be started when these parts are open. However, for safety purposes, the machine
should be disconnected from the power lines by a disconnect switch or by removing the plug
from its receptacle. Check all safety switches periodically for proper operation.
Safety Tags
A set of metal plates is attached to the machine to warn of potential danger.
Level Sensor (optional)
Level sensors monitor the level in the cutting chamber, automatically shutting off the
granulator in case of overfilling.
4 Inch Granulator Chapter 2: Functional Description 10 of 47