Airaid 300-259 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.10.22.13
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable and should be cleaned periodically.
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
10. Install the supplied hump hose (#5) onto the filter
adapter using two #72 hose clamps. Leave the clamps
loose for now.
13. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.
14. Reconnect the negative battery cables!
12. Install the Airaid Premium Filter (#1) onto the
filter adapter and tighten the clamp. Install the weath-
erstrip onto the top of the CAB starting at the right
fender and working your way towards the radiator.
Next reinstall the factory filter minder and grommet
into the Airaid Intake Tube.
11. Install the Airaid Intake Tube (#2) into the factory
turbo elbow and then into the hump hose. Adjust for
fit, and then tighten all three hose clamps. Reinstall the
intake temperature sensor into the Airaid Intake Tube
using two 8-32 button head screws (#7) and #8 flat
washers (#8). Do Not Use The Factory Screws!
FILTER IDENTIFICATION
700-469 Airaid Oiled Media 701-469 Airaid SynthaMax Dry Media - Red
702-469 Airaid SynthaMax Dry Media - Black 703-469 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not require
oil. Service air filter as needed by
cleaning with common non-petroleum
all-purpose household cleaner and wa-
ter. Simple Green®, Formula 409® or
equivalent works great. Apply cleaner
to outside of air filter and allow to
soak. Then flush filter clean from the
inside out with a garden hose and re-
peat steps if necessary. Do not apply
high pressure water or air to clean fil-
ter. Allow filter to air dry and reinstall.