Airaid 1025 - Manual (Page 2)

5.Unclip the coolant line from the lower half of the factory
airbox and pull out .
4. Remove the six bolts that hold the Intake assembly to the
vehicle. 3. Remove the air filter element from the lower half of the air-
box.
2
3
5
6
4
1
8. A.) Disconnect the throttlebody motor. B.) Remove the two
bolts and two nuts that hold the throttlebody onto the mani-
fold.
7. Using a pair of pliers, compress the spring clamp on the
throttlebody side of the intake tube and remove the tube.
6. Rotate the factory airbox and tube assembly to the passenger
side of the engine compartment and stand it up vertically.
B
A