Airlink AWLH1201 - Manual (Page 13)

5
HARDWARE INSTALLATION
LED Indicator
LNK (LINK)
The LNK indicator lights green when the WLAN PCI Adapter is
connected to a network successfully. Otherwise the LNK indicator
remains off while the W LAN is scanning the wireless devices.
Installing the WLAN PCI Adapter
1. Shut down the computer, unplugs its power cord, and remove the
chassis cover.
2. Insert the contact edge of the WLAN PCI Adapter into the
connector of any available PCI Bus Master expansion slot. Press
the card firmly into the connector such that the card’s contacts are
fully seated in the PCI slot connector.
3. Install the bracket screw and secure the card to the computer chassis.
4. Cover the computer’s chassis.
5. Switch computer power on. The computer will automatically
activate the newly installed driver and utility the WLAN PCI
Adapter.