Airlink AWLH1201 User Manual
Page 23
15
Ø
Key Setting #1 ~ #4:
You can type the key that you want to use from Key#1 to Key #4, and
the key that you type will be the encryption between the statio n that
you connected with, if you select 64bit, you must type 10 values in the
following range (0~F, hexadecimal). Besides, if you select 128bit, you
must type 26 values (0~F, hexadecimal).
Follow the steps below to set your WEP:
1.
Select the Encryption type: 64bit or 128bit.
2.
Type WEP Key: If you select 64bit, you must type 10 values in
the following range (0~F, hexadecimal) from Key1 to Key 4
space. Besides, if you select 128 bit, you must type 26 values
(0~F, hexadecimal) in each WEP Key from Key 1 to Key 4.
3.
Select WEP Key: Select one of WEP Key from Key1 to Key4
for using.
4.
Select the Authentication Type: Open System or Shared Key.
Note: After all the settings are completed, click on Submit button to save the setting.