Alinco DJ-X7 - Manual (Page 7)

7
2.1 Mounting Arrangement
■Installing & uninstalling antenna
●Installing antenna
1.Hold the antenna at the base.
2.Attach the antenna to the
antenna connector.
3.Turn the antenna clockwise
until it stops.
4.Ensure the antenna is securely
installed to the receiver.
●Uninstalling antenna
Turn the antenna counterclockwise.
Caution
When antenna connector conversion is necessary, be sure
to select a proper conversion connector or cable which
does not overburden the receiver. Otherwise, this may
cause the damage to the receiver and/or the antenna.
Installing an excessively high performance external
antenna may get worse of the receiving conditions.
■Installing & uninstalling battery
●Installing battery
1.Align the projections on the
battery with the grooves on
the receiver.
2.Push the battery in the direction
of the arrow.
3.Push down the latch of the
battery until it clicks.
●Uninstalling battery
1.Push the latch of the battery
upward.
2.Pull out the battery in the
direction of the arrow.
Latch
Latch
Projections
Grooves
NOTE
2
Accessories
Chapter 2 Accessories