Alinco DJ-X3 - Manual (Page 25)

25
2
Basic
O
peration
Scan Function
The scan function periodically changes the frequency to search for a signal.
The DJ-X3 has four types of scan functions.
VFO scan ······································Scans the entire band in VFO mode.
Program scan································Scans a specified range of frequencies. The
upper limit and lower limit of the range need
to be set in advance.
Preset scan ··································Scans the entire band in Preset mode.
Memory scan ·······························Scans specified memory banks.
■
VFO Scan
1
Switch to VFO mode by pressing the [V/P/M (MW)] key.
2
Press the [SCAN (SCRT)] key.
3
Rotate the dial while holding the [SCAN(SCRT)] key and change the
display to "vFo."
4
Release the [SCAN (SCRT)] key.
VFO scan starts, and ". (decimal point)" flashes on the display.
Scanning pauses when a signal is received.
B
Flashes
POWER
SCAN
SCRT
V/P/M
MW
BANK
WIDE BAND
COMMUNICATION RECEIVER
DJ-X3
1M/10M
1
3
2,3,4