Quick installation checklist, Extron contact information – Extron electronic AVTrac 42-122-xx User Manual

Page 28

Advertising
background image

AVTrac • Quick Installation Checklist

Extron

USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517 FAX

Extron

USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797 FAX

Extron

EMEA

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron

Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron

Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron

China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron

Middle East

+971.4.2991800

+971.4.2991880 FAX

Installation of the AVTrac can be divided into six main sections:

Step 1 — Before Getting Started

Decide where the Track will be placed (pages 4 and 5) and, if necessary, prepare

†

the site.
Open the two boxes containing the AVTrac kit and identify all the items provided

†

(pages 2 and 3).
Gather any additional tools needed for installation (page 6).

†

Step 2 — Install Track

Remove existing carpeting (page 7).

†

If cables will be run through a drywall cavity, cut a hole in drywall (page 8).

†

Measure and cut track pieces (page 9).

†

Secure the track to the floor (pages 10 and 11).

†

Step 3 — Install Connectivity Box

Remove the top cover and end plates from connectivity box (page 10) and place

†

the box on the track (page 12).
Secure the connectivity box to the track and floor (page 12).

†

Step 4 — Install AC Power Module

If necessary, wire the AC power receptacle (page 13).

†

Seat and secure AC power module in connectivity box (page 14).

†

Run AC conduit and connect to junction box (page 14).

†

Step 5 — Install Architectural Adapter Plates

Install AAPs in connectivity box cover panel (page 15).

†

Run and connect cables to the AAPs (page 15).

†

Reattach the end plates and cover panel (page 15).

†

Step 6 — Finishing Up

Snap on cover track (page 16).

†

Cut and glue carpet to side and end ramps (pages 16 and 17).

†

Trim wall baseboards and apply carpet or rubber strip finish to cover track

†

raceway (page 17).

Quick Installation Checklist

©

2008 Extron Electronics. All rights reserved.

Advertising