All Power APW5022 - Manual (Page 14)

3 1
Step 3
Turn the adjustable nozzle to end of “ - ”, put the pressure washer into low-pressure
mode.
Step 4
To apply the detergent cleanser to your working area, turn the pressure washer switch
to the ON position. Pull the trigger to operate the unit. The pressure washer will mix
the detergent with water. Do not allow the detergent to dry on the object that you are
cleaning.
WARNING: NEVER USE PRODUCTS WITH BLEACH OR CHLORINE
OR ANY OTHER CORROSIVE MATERIALS, INCLUDING LIQUIDS
CONTAINING SOLVENTS (I.E. GAS, OILS ETC), TRI-SODIUM
PHOSPHATE PRODUCTS, AMMONIA, OR ACID-BASED CLEANERS.
THESE CHEMICALS WILL HARM THE UNIT AND CAUSE DAMAGE
TO THE SURFACE BEING CLEANED. ALWAYS READ THE LABEL.
Step 5
To clean the working area, turn the adjustable nozzle to end of “ + ”, return it to
high-pressure mode. Spray high-pressure water onto the work area to rinse off
the work area and any remaining detergent.
2000PSI Pressure Washer
Low Pressure Setting
High Pressure Setting