All Power APW5022 - Manual (Page 9)

8
Step 3
Fasten the high pressure hose(C) tightly onto the gun assembly(B) and tighten to avoid
leakage.
Step 4
Attach the hose connector to pressure washer. Before attaching the connector to the male
fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer
before shipping. This plastic cap can be discarded once removed. After both components have
been installed, attach the garden hose with connector screw on the pressure washer. Connect
the garden hose to the waterspout.
2000PSI Pressure Washer
C
B