Allstar Performance ALL11272 - Manual

Allstar Performance 8300 Lane Dr., Watervliet, MI 49098
Phone: (269) 463-8000 Fax: (800) 772-2618 www.allstarperformance.com
Form 1125 Page 1 of 2 Rev. 022613
Allstar Performance® will not assume liability for personal or property damage resulting from the use or misuse of any
product we manufacture or sell, whether on the street or on the race track. Purchase and/or use of this product implies
recognition and acceptance of our entire warranty and disclaimer by customer.
A
B
C
E
Female Quick
Disconnect Fitting
H
D
F
G
Contents List:*
A. Lift Platform Assembly LH (With Hydraulic Cylinder And Down Assist Canister) (1 pc)
B. Lift Platform Assembly RH (With Hydraulic Cylinder And Down Assist Canister) (1 pc)
C. Bridge Assembly With Hose (1 pc)
D. Bridge Assembly (1 pc)
E. Handle Sides (2 pcs)
F. Handle Support Tubes (2 pcs)
G. Riser Blocks (2 pcs)
H. 20' Hydraulic Hose (1 pc)
I. "X" Brace
Hardware Bag Includes:
1/4" x 1-3/4" Bolts (12 pcs)
3/8" x 1/2" Bolts (4 pcs)
1/4" x 3/4" Bolts (2 pcs)
Female Quick Disconnect Fitting (1 pc)
Nuts, Washers And Grease Fittings
* Ensure all contents are included before
assembly begins.
ASSEMBLY INSTRUCTIONS
Race Car Lift
PLEASE READ!
• The lifting and lowering motion of this lift is accomplished through use of a separate hydraulic pump such as part no.
ALL11280 or comparable 110V style pump.
• This lift is specifically designed for use on race cars and not approved for use on street type vehicles. Maximum rated
capacity is 2,400 lbs., do not exceed maximum weight rating, damage to lift may occur.
• Trial test up/down function of lift and make sure all hose connections are tight before subjecting lift to weight of race car.
• Always keep safety in mind and make sure lift is clear of people and objects before raising or lowering.
• Make sure lift has returned to its fully collapsed position and it is clear of all chassis components before driving away.
• Periodically check all hardware and tighten as needed. Check hydraulic hose for signs of damage and replace if necessary
using ALL11274 20' hydraulic hose or ALL11275 30' hydraulic hose.
I