Allstar Performance ALL81220 - Manual (Page 2)

Allstar Performance 8300 Lane Drive, Watervliet MI 49098
Phone: (269) 463-8000 Fax: (800) 772-2618 www.allstarperformance.com
14. Starting with the spark plug wire noted in step 4, position the cap on the distributor and install this spark plug wire on the
terminal that the distributor rotor is aligned to.
15. Attach the distributor cap.
16. Secure remaining spark plug wires one by one using original cap and marks from Step 4 as a reference to ensure accuracy.
17. Reconnect battery cables. Be sure to hook up the NEGATIVE (-) cable last.
18. Set ignition timing according to manufacturers or engine builder’s specifi cations.
Distributor Final Connections
ALL81220 requires use of an aftermarket control box and ignition coil.
See fi gure 2.
Centrifugal Advance Curve
A combination of springs, weights, advance stop bushing, and an advance cam make up the working parts of the centrifugal ad-
vance. By changing springs and the advance stop bushing, this distributor will operate in a wide range of applications.
FORM 1031 Page 2 of 4 Rev.071907
FIG. 2