Amer Networks WLPCG - Manual (Page 11)

5
5. After finish the installation, plugged in the Wireless Cardbus Adapter, you will
see Wireless Configuration Utility Country Selector, select the country where
you are using this Wireless device, users are responsible for ensuring that the
channel set configuration is in compliance with the regulatory standards of
these countries.
.
Warning: Be noted that selecting the incorrect region may result in a
violation of applicable law; you will need to select the correct domain.
6. When the Wireless Cardbus Adapter was installed, you will see the icon on the
Windows task bar.
When the icon in the toolbar represent in green color, it is properly connected to
the network and if it represent in red color, then it is not connected to the
network.