Amped Wireless REC22A - High Power AC1200 Plug-In Wi-Fi Range Extender User Manual
Page 64
REC22A
USER’S GUIDE
63
63
I can no longer connect to the Range Extender wirelessly.
a. Power on and off the Range Extender and try again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the
Range Extender. Access
and run through the Setup Wizard again.
After you have successfully reset the Home Network connection, try connecting wirelessly again.
The connection to the Home Network seems slow. File transfers take a long time to transfer.
a. You may be too far away from your Home Network. The closer the Range Extender is to your Home
Network, the better its connection will be. The Range Extender must have a strong signal in order to
repeat the signal with fast speeds and further range. Move the Range Extender closer to your Home
Network and try again.
b. Check that the antenna is connected securely to the antenna connector.
c. You may be downloading from the Internet and not within your Home Network or Extended Network.
Files transferred through the Internet are limited by your ISP speed and the data download speeds from
the website that you are downloading from.
d. Your computer may be using an older Wi-Fi adapter with lower speed limits and range capabilities
(802.11b/g/n).