Amped Wireless REC22A - High Power AC1200 Plug-In Wi-Fi Range Extender User Manual
Page 65
REC22A
USER’S GUIDE
64
64
e. To achieve 802.11ac Wi-Fi speeds for your extended network, it is necessary to extend an 802.11ac Wi-
Fi router. Check that your home router is an 802.11ac router. Extending a router with slower Wi-Fi
speeds, such as 802.11b/g/n will result in slower Wi-Fi speeds for your extended network.
Network devices connected to the wired ports of the Range Extender do not have Internet access.
a. The Wired Port Routing on the Range Extender may not be defined correctly. While connected to the
Range Extender, open your web browser and access
From the web
menu, go to
More Settings > Network Settings > Wired Port Configuration
. Check that the wired port is
routed through an active Home Network connection. If the Range Extender is connected to a 2.4GHz
network only, adjust the routing so that all wired ports traffic routes through the 2.4GHz Home
Network.
The Signal Strength LED on the top of the Range Extender is not on.
a. Please check that the Range Extender is connected to a Home Network or router. The Signal Strength
LED will not be on if there is no connection to a Home Network.
b. The connection to your Home Network may have disconnected. Please check your connection by
accessing the web menu dashboard and reconfigure, if necessary.