Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender - Manual (Page 42)

SR10000 USER’S GUIDE
41 41
DEFAULT SETTINGS
The default settings for your Range Extender are listed here. If for some reason you need to return your Range
Extender back to default settings, hold down the Reset button on the back panel for 10 seconds. The Range
Extender will reset back to factory settings as listed below:
IP Address: 192.168.1.240
Web Menu Access: http://setup.ampedwireless.com
SSID: Amped_SR