Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender User Manual
Page 44
SR10000
USER’S GUIDE
43
43
Troubleshooting
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc.
I entered http://setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Range Extender’s Wi-Fi network: Amped_SR
b. Try to use a different web browser. We recommend the Google Chrome web browser.
c. Try to open your web browser to the default IP address by putting this number into your web browser
instead: 192.168.1.240
d. Power off (unplug the power adapter from the Range Extender) the Range Extender and power it back
on. Try again.
e. Reset your Range Extender to default settings by holding the Reset Button (located on the back panel)
for ten (10) seconds and try again.
f. If steps (a) thru (e) fail, disconnect your PC from all Wi-Fi networks. Attach an Ethernet cable between
the Range Extender and your PC. Try to access
in.