Elk M1XEP - Manual (Page 4)

ELK-M1XEP Installation Manual Page 4
Basics of Networking
WAN
LAN
The installer must have a basic understanding of Ethernet setup to install and configure the M1XEP. If you do not
have this basic knowledge, please seek the assistance of a network professional.
The
Internet
ISP
Cable
DSL
Satellite
Location
High Speed
Modem
Cable Modem
DSL Modem
Satellite Modem
Router with Built-In
Dynamic DNS Support
M1XEP
PC
Technical support from Elk
Products, Inc. is limited to the
setup and connection of the
M1XEP inside the local network.
Connection to outside the local
network may require assistance from
others, including the Internet service
provider and the network administrator.
If using a DSL modem, the modem may need to
be bridged to allow the IP address to be passed
to the router. Contact the manufacturer of the
modem for assistance.
Refer to the Notes on
Router Setup located
on page 14.
Local Area Network
Wide Area Network