ARAG Alfa 310S - Manual (Page 3)

via Palladio, 5/A - 42048 RUBIERA (RE) - Italy - tel. + 39 0522 622011 - Fax +39 0522 628944 - www.aragnet.com Cod. D20250_GB-m01
O
PERATION ALARMS
Seed sensor XX! No signal - Alfa 310S is not receiving the signal from seed sensor on line XX
Shaft sensor XX! No signal - Alfa 310S is not receiving the signal from shaft Rev. sensor XX
Speed sensor! No signal - Alfa 310S is not receiving the signal from speed sensor
Rev. sensor X! No signal - Alfa 310S is not receiving the signal from rev. sensor X
seeding exceeding max. limit - Number of seeds per metre exceeds maximum set value
seeding below min. limit - Number of seeds per metre is below minimum set value
Row XX: seeding exceeding max. limit - Number of seeds per metre on seed row XX exceeds maximum set value
Row XX: seeding below min. limit - Number of seeds per metre on seed row XX is below minimum set value
Row XX: Seeding tube clogged - Seeding tube is clogged or seed sensor for row XX has low efficiency
Row XX: no seeding - Seeds are not detected on row XX
Impeller X! Speed too high - Impeller X speed exceeds maximum set value
Impeller X! Speed too low - Impeller X speed is below minimum set value
SD card not available - Memory card is not inserted
SD card writing locked out - Memory card writing locked out
Impossible to save the file - No space available or damaged memory card
Slow down! Maximum speed reached - Vehicle speed exceeds maximum set value
Row XX: no fertiliz. (A) - Fertilizer A is not detected on row XX
Row XX: no fertiliz. (B) - Fertilizer B is not detected on row XX
Row XX: Fertilizer tube clogged (B) - Seeding tube is clogged or fertilizer sensor B for row XX has low efficiency
Shaft XX: No rotation - No rotation of shaft XX is detected
- Seeding tube is clogged or fertilizer sensor A for row XX has low efficiency Row XX: Fertilizer tube clogged (A)
Rev. sensor 1 ! No rotation
Position sensor! No signal - Alfa 310S is not receiving the signal from seed state sensor