Ascaso KAP User Manual
Page 23
23
NOTE:
On TRONIC models, once the
steam has stopped, the machine
must return to correct coffee-
making temperature. As a warning,
the espresso
2
and lungo
3
buttons blink during the process,
while the hot water and steam
buttons are lit.
After approximately 60 seconds, all
of the buttons are lit once again.
We recommend waiting 5 minutes
before making coffee.
IMPORTANT:
After each use it is advisable to
release steam for 5 seconds to
clean the tube and avoid blockage.
To clean absorption holes (A and
B), you can use a toothpick or
paper clip. Make sure the nozzle is
free of obstructions. Hole B should
always be in the upper area.
IMPORTANT:
Never touch the
hot water/steam
nozzle during or
after use. There
is a risk of burn
injuries. Use a
the plastic clip
attached to the
nozzle.
DISPENSING HOT WATER
(TRONIC AND TRONIC DUO
MODELS)
1. Put a cup below the hot water/
steam nozzle
6
.
2. Press the hot water button
4
.
The machine begins dispensing
hot water. During this process,
the hot water button
4
remains
lit, while the rest of the buttons
are unlit.
3. To stop dispensing, press the hot
water button again
4
. The hot
water automatically stops after
30 seconds.
IMPORTANT:
Never touch the hot water/steam
nozzle during or after use. There
is a risk of burn injuries. Use a the
plastic clip attached to the nozzle.
5
ENGLISH