Eneo PXD-1020F02 - Manual (Page 16)

16
Accessing the camera
The IP Dome Camera’s default IP address is: 192.168.1.10. Therefore, to
access the IP Dome Camera for the first time, set the PC’s IP address as:
192.168.1.XXX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
Login ID & Password
• Key in the IP Dome Camera’s IP address in the URL bar of the Web
browser window and press “Enter.”
• Enter the default user name (admin) and password (admin) in the
prompt request dialogue. Note that user name is case sensitive.
Install the ActiveX control
• After connecting to the IP Dome Camera, the request for installing the
ActiveX control will appear just below the URL bar.
• Right Click on the information bar, and press “Install ActiveX Control…”
to permit ActiveX control installation.
• In the pop-up security warning window, click “Install” to start down-
loading DC Viewer software on the PC.
• Press “Finish” when DC Viewer installation is complete.