Eneo HDB-2080M2810IR D - Manual (Page 22)

22
Set the video format according to system, EX-SDI or HD-SDI
To select the camera’s output video format (EX-SDI or HD-SDI), use the Video format
Switch on the side of the camera. Only one format can be used at a time (see also “Using
OSD controller”).
OSD menu startup
Press ‘ ●’ (OSD menu Joy stick key) down for about 2 seconds to access the setup menu
mode.
1M~120M via RG59u or 5C2V cable
Camera (HD-SDI)
DVR (HD-SDI)
Camera (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
350M+ via RG59u or
5C2V cable
HDA-3000E
(EX-SDI)
HDA-3000E
(EX-SDI)
1M~120M via
RG59u or 5C2V
cable
DVR (HD-SDI)
Camera (EX-SDI)
350M+ via RG59u or 5C2V cable
HDA-3000E
(EX-SDI)
1M~120M via
RG59u or 5C2V
cable
DVR (HD-SDI)
350M+ via RG59u or 5C2V cable
Camera (EX-SDI) DVR (EX-SDI)
Camera (HD-SDI)
DVR (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
1M~120M via RG59u or
5C2V cable
HDA-3000E
(HD-SDI)
HDA-3000E
(HD-SDI)
1M~120M via
RG59u or 5C2V
cable