Eneo PNR-5108 - Manual (Page 111)

Network Video Recorder
103
 IP Access Control tab: Grants or limits access from users using the IP addresses within a certain range.
Clicking the OK button completes registration of the user group.
2. Click the added user group in the Group list, and then the
button at the bottom of the user list. The
Add User window appears.
 Name: Enter the user name.
 ID, Password, Confirm: Enter a unique user ID and password (8 to 16 characters without spaces) for
access to the iNEX program.

No Password: Allows you to log in without a password when running the iNEX program.

Password Expiration Setup: Set the password expiration period. If the password has not been
changed during the password expiration period, you will be informed of it when you log on.
 Monitoring Group: Displays the user who will be forwarded notification of events when events occur.
Clicking the Modify button allows you to edit the users. Refer to 15.2 Managing Events, Event
Acknowledgement (p. 119) for details about the event forwarding.
 E-Mail: Enter the email address of the user if you want to notify event detection to the user via E-mail.
An email address must include the “@” character to be a valid address. Refer to Chapter 15 —
Event Management (p. 111) for details about notifying event detection via E-mail.
 Phone, Description: Enter the telephone number and description of the user if you want. Only numbers
and “–” are allowed when entering a telephone number.
Click the OK button at the bottom.
3. Clicking the registered user group or a user in the list, and then the
button at the bottom allows you
to edit the information.