Eneo PNR-5108 - Manual (Page 112)

Operating Instructions
104
Chapter 14
— Storage Management
You can allocate and mange storage for recording. Go to the Start Menu → Click iNEX → Run the iNEX
Setup program → Select the Service menu.
Allocating Storage
When additional hard disk drives are installed, it is required that you allocate storage to the hard disk drives.
NOTE: When removing a hard disk drive that contains recorded video from the NVR system and installing
it in another NVR system, you cannot search or play back the video recorded on the original NVR system.
Select a recording service and click the
button at the bottom. The Setup – Recording Service window
appears. Select the Device Setup tab.
The list of cameras registered on the current
recording service is displayed. Clicking the
Add button at the bottom allows you to
register other cameras on the current
recording service. Selecting a device and
clicking the Remove button deletes the
device from the current recording service.