Installing a cfp2 transceiver module, Removing a cfp2 transceiver module – H3C Technologies H3C S12500-X Series Switches User Manual
Page 2
Advertising
2
Installing a CFP2 transceiver module
Figure 1 Installing a CFP2 transceiver module
To install a CFP2 transceiver module:
1.
Pivot the metal handle up so that the handle is on the top of the transceiver module.
2.
Push the transceiver module slowly into the slot until it clicks into the slot.
When the transceiver module clicks into the slot, the module is firmly seated in the
slot and do not continue to push it.
Removing a CFP2 transceiver module
Figure 2 Removing a CFP2 transceiver module
1
2
Advertising