H3C Technologies H3C S12500-X Series Switches - Manual (Page 2)

Configuration guide Content
Layer 2—LAN Switching
Configuration Guide
Covers Layer 2 technologies and features used on a LAN switched
network, such as VLAN technology, port isolation, and Spanning Tree.
You can use these features to divide broadcast domains, remove Layer
2 loops, isolate users within a VLAN and so on. This guide includes:
• Ethernet interface
• loopback, null, and inloopback interfaces
• Bulk interface configuration
• MAC address table and MAC Information
• Ethernet link aggregation
• Port isolation
• Spanning tree protocols
• Loop detection
• VLAN
• VLAN mapping
• LLDP
Layer 3—IP Services Configuration
Guide
Describes how to configure ARP, IP addressing, IP performance
optimization, IP forwarding basics, DHCP, DNS, and UDP helper. This
guide includes:
• ARP (including gratuitous ARP and proxy ARP)
• IP addressing
• DHCP (DHCP overview, DHCP server, DHCP relay agent, DHCP
client, and DHCP snooping)
• DNS
• Basic IP forwarding and load sharing
• IRDP
• IP performance optimization
• UDP helper
Layer 3—IP Routing Configuration
Guide
Covers the routing technologies for IPv4 networks of different sizes and
route filtering. This guide includes:
• Basic IP routing
• Static routing (including default route configuration)
• RIP
• OSPF
• IS-IS
• BGP
• Policy-based routing
• Routing policy
IP Multicast Configuration Guide
Covers Layer 3 IPv4 multicast protocols (IGMP and PIM), Layer 2 IPv4
multicast protocols (IGMP snooping). This guide includes:
• Multicast overview
• IGMP snooping
• Multicast routing and forwarding
• IGMP
• PIM
• MSDP