H3C Technologies H3C S5820V2 Series Switches Instruction Manuals and User Guides
We have 25 Instruction Manuals and User Guides for H3C S5820V2 Series Switches H3C Technologies
Manuals
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 8 |
| Size: | 690 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 2.41 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Overview
- SFP modules
- 100-Megabit SFP fiber transceiver module
- 622-Megabit SFP fiber transceiver module
- Gigabit SFP fiber transceiver module
- 2.5-Gigabit SFP fiber transceiver module
- 100-Megabit BIDI fiber transceiver module
- Gigabit BIDI fiber transceiver module
- BIDI GEPON OLT fiber transceiver module
- Gigabit CWDM fiber transceiver module
- Gigabit SFP copper transceiver module
- Gigabit SFP cable
- SFP+ modules
- XFP modules
- CX4 cables
- QSFP+ modules
- CFP modules
- CFP2 modules
- CXP modules
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 751 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- IRF configuration
- IRF overview
- Basic concepts
- Establishment, operation, and maintenance of an IRF fabric
- IRF fabric configuration task list
- Pre-configuring an IRF member switch in standalone mode
- Saving configuration to the startup configuration file
- Switching operating mode
- Accessing an IRF fabric
- Configuring IRF member switches in IRF mode
- Specifying an IRF domain ID for an IRF fabric
- Modifying a member ID for a switch
- Specifying a priority for a member switch
- Configuring IRF ports
- Enabling auto reboot for IRF fabric merge
- Configuring a description for a member switch
- Configuring load sharing criteria for IRF links
- Specifying the preservation time of bridge MAC address
- Enabling automatic system software updating
- Setting the IRF link down report delay
- Configuring MAD detection
- IRF configuration fast recovery
- Displaying and maintaining an IRF fabric
- IRF fabric configuration examples
- LACP MAD detection-enabled IRF configuration example (with two member switches)
- BFD MAD detection-enabled IRF configuration example (with two member switches)
- LACP MAD detection-enabled IRF configuration example (with four member switches)
- BFD MAD detection-enabled IRF configuration example (with four member switches)
- Switching the operating mode of IRF member switches from IRF to standalone
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 2.06 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- ARP configuration
- Gratuitous ARP configuration
- Proxy ARP configuration
- Proxy ARP overview
- Enabling proxy ARP
- Displaying and maintaining proxy ARP
- Proxy ARP configuration examples
- IP addressing configuration
- DHCP overview
- DHCP server configuration
- Introduction to DHCP server
- DHCP server configuration task list
- Configuring an address pool for the DHCP server
- Configuration task list
- Creating a DHCP address pool
- Configuring address allocation mode for a common address pool
- Configuring dynamic address allocation for an extended address pool
- Configuring a domain name suffix for the client
- Configuring DNS servers for the client
- Configuring WINS servers and NetBIOS node type for the client
- Configuring BIMS server information for the client
- Configuring gateways for the client
- Configuring Option 184 parameters for the client with voice service
- Configuring the TFTP server and bootfile name for the client
- Specifying a server’s IP address for the DHCP client
- Configuring self-defined DHCP options
- Enabling DHCP
- Enabling the DHCP server on an interface
- Applying an extended address pool on an interface
- Configuring the DHCP server security functions
- Enabling client offline detection
- Enabling handling of Option 82
- Specifying the threshold for sending trap messages
- Displaying and maintaining the DHCP server
- DHCP server configuration examples
- Troubleshooting DHCP server configuration
- DHCP relay agent configuration
- Introduction to DHCP relay agent
- DHCP relay agent configuration task list
- Enabling DHCP
- Enabling the DHCP relay agent on an interface
- Correlating a DHCP server group with a relay agent interface
- Configuring the DHCP relay agent security functions
- Enabling offline detection
- Configuring the DHCP relay agent to release an IP address
- Configuring the DHCP relay agent to support Option 82
- Displaying and maintaining the DHCP relay agent
- DHCP relay agent configuration examples
- Troubleshooting DHCP relay agent configuration
- DHCP client configuration
- DHCP snooping configuration
- DHCP snooping overview
- DHCP snooping configuration task list
- Configuring DHCP snooping basic functions
- Configuring DHCP snooping to support Option 82
- Configuring DHCP snooping entries backup
- Enabling DHCP starvation attack protection
- Enabling DHCP-REQUEST message attack protection
- Configuring DHCP packet rate limit
- Displaying and maintaining DHCP snooping
- DHCP snooping configuration examples
- IPv4 DNS configuration
- IP performance optimization configuration
- UDP Helper configuration
- IPv6 basics configuration
- IPv6 overview
- IPv6 basics configuration task list
- Configuring basic IPv6 functions
- Configuring IPv6 ND
- Configuring PMTU discovery
- Configuring IPv6 TCP properties
- Configuring ICMPv6 packet sending
- Displaying and maintaining IPv6 basics configuration
- IPv6 basics configuration example
- Troubleshooting IPv6 basics configuration
- DHCPv6 overview
- DHCPv6 relay agent configuration
- DHCPv6 client configuration
- IPv6 DNS configuration
- Tunneling configuration
- Tunneling overview
- Tunneling configuration task list
- Configuring a tunnel interface
- Configuring an IPv6 manual tunnel
- Configuring a 6to4 tunnel
- Configuring an ISATAP tunnel
- Configuring an IPv4 over IPv4 tunnel
- Configuring an IPv4 over IPv6 manual tunnel
- Configuring an IPv6 over IPv6 tunnel
- Displaying and maintaining tunneling configuration
- Troubleshooting tunneling configuration
- GRE configuration
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 251 |
| Size: | 2.42 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Ethernet interface configuration
- Ethernet interface overview
- Ethernet interface naming conventions
- General configuration
- Configuring basic settings of an Ethernet interface or subinterface
- Configuring an Ethernet interface
- Configuring an Ethernet subinterface
- Shutting down an Ethernet interface or subinterface
- Configuring flow control on an Ethernet interface
- Configuring link change suppression on an Ethernet interface
- Configuring loopback testing on an Ethernet interface
- Configuring the link mode of an Ethernet interface
- Configuring jumbo frame support
- Configuring a Layer 2 Ethernet interface
- Layer 2 Ethernet interface configuration task list
- Configuring a port group
- Setting speed options for auto negotiation on an Ethernet interface
- Configuring storm suppression
- Setting the statistics polling interval
- Enabling loopback detection on an Ethernet interface
- Setting the MDI mode of an Ethernet interface
- Testing the cable connection of an Ethernet interface
- Configuring storm control on an Ethernet interface
- Setting the MTU for a Layer 3 Ethernet interface or subinterface
- Displaying and maintaining an Ethernet interface or subinterface
- Loopback and null interface configuration
- MAC address table configuration
- Overview
- Configuring the MAC address table
- Displaying and maintaining MAC address tables
- MAC address table configuration example
- MAC Information configuration
- Ethernet link aggregation configuration
- Overview
- Ethernet link aggregation configuration task list
- Configuring an aggregation group
- Configuring an aggregate interface
- Configuring the description of an aggregate interface or subinterface
- Configuring the MTU of a Layer 3 aggregate interface or subinterface
- Enabling link state traps for an aggregate interface
- Setting the minimum number of Selected ports for an aggregation group
- Shutting down an aggregate interface
- Restoring the default settings for an aggregate interface
- Configuring load sharing for link aggregation groups
- Enabling link-aggregation traffic redirection
- Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation configuration examples
- Port isolation configuration
- Spanning tree configuration
- STP
- RSTP
- PVST
- MSTP
- Protocols and standards
- Spanning tree configuration task list
- Configuring the spanning tree
- Setting the spanning tree mode
- Configuring an MST region
- Configuring the root bridge or a secondary root bridge
- Configuring the device priority
- Configuring the maximum hops of an MST region
- Configuring the network diameter of a switched network
- Configuring spanning tree timers
- Configuring the timeout factor
- Configuring the maximum port rate
- Configuring edge ports
- Configuring path costs of ports
- Configuring the port priority
- Configuring the port link type
- Configuring the mode a port uses to recognize/send MSTP packets
- Enabling the output of port state transition information
- Enabling the spanning tree feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring protection functions
- Displaying and maintaining the spanning tree
- Spanning tree configuration examples
- BPDU tunneling configuration
- VLAN configuration
- Super VLAN configuration
- Isolate-user-VLAN configuration
- Voice VLAN configuration
- GVRP configuration
- QinQ configuration
- Introduction to QinQ
- QinQ configuration task list
- Configuring basic QinQ
- Configuring selective QinQ
- Configuring the TPID value in VLAN tags
- QinQ configuration examples
- VLAN mapping configuration
- LLDP configuration
- Service loopback group configuration
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 397 |
| Size: | 3.51 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- IP routing basics configuration
- Static routing configuration
- Introduction
- Configuring a static route
- Configuring BFD for static routes
- Configuring static route FRR
- Displaying and maintaining static routes
- Static route configuration examples
- RIP configuration
- RIP overview
- RIP configuration task list
- Configuring RIP basic functions
- Configuring RIP route control
- Tuning and optimizing RIP networks
- Configuring RIP timers
- Configuring split horizon and poison reverse
- Configuring the maximum number of load balanced routes
- Enabling zero field check on incoming RIPv1 messages
- Enabling source IP address check on incoming RIP updates
- Configuring RIPv2 message authentication
- Specifying a RIP neighbor
- Configuring RIP-to-MIB binding
- Configuring the RIP packet sending rate
- Configuring RIP FRR
- Configuring BFD for RIP
- Displaying and maintaining RIP
- RIP configuration examples
- Configuring RIP version
- Configuring RIP route redistribution
- Configuring an additional metric for a RIP interface
- Configuring RIP to advertise a summary route
- RIP FRR configuration example
- Configuring BFD for RIP (single-hop detection in BFD echo packet mode)
- Configuring BFD for RIP (bidirectional detection in BFD control packet mode)
- Troubleshooting RIP
- OSPF configuration
- Introduction to OSPF
- OSPF configuration task list
- Enabling OSPF
- Configuring OSPF areas
- Configuring OSPF network types
- Configuring OSPF route control
- Configuration prerequisites
- Configuring OSPF route summarization
- Configuring OSPF inbound route filtering
- Configuring ABR Type-3 LSA filtering
- Configuring an OSPF cost for an interface
- Configuring the maximum number of OSPF routes
- Configuring the maximum number of load-balanced routes
- Configuring OSPF preference
- Configuring OSPF route redistribution
- Advertising a host route
- Tuning and optimizing OSPF networks
- Configuration prerequisites
- Configuring OSPF packet timers
- Specifying LSA transmission delay
- Specifying SPF calculation interval
- Specifying the LSA arrival interval
- Specifying the LSA generation interval
- Disabling interfaces from receiving and sending OSPF packets
- Configuring stub routers
- Configuring OSPF authentication
- Adding the interface MTU into DD packets
- Configuring the maximum number of external LSAs in LSDB
- Enabling compatibility with RFC 1583
- Logging neighbor state changes
- Configuring OSPF network management
- Enabling message logging
- Enabling the advertisement and reception of opaque LSAs
- Configuring OSPF to give priority to receiving and processing hello packets
- Configuring the LSU transmit rate
- Enabling OSPF ISPF
- Configuring OSPF FRR
- Configuring OSPF Graceful Restart
- Configuring OSPF NSR
- Configuring BFD for OSPF
- Displaying and maintaining OSPF
- OSPF configuration examples
- Configuring OSPF basic functions
- Configuring OSPF route redistribution
- Configuring OSPF to advertise a summary route
- Configuring an OSPF stub area
- Configuring an OSPF NSSA area
- Configuring OSPF DR election
- Configuring OSPF virtual links
- Configuring OSPF Graceful Restart
- Configuring OSPF NSR
- Configuring route filtering
- Configuring OSPF FRR
- Configuring BFD for OSPF
- Troubleshooting OSPF configuration
- IS-IS configuration
- IS-IS overview
- IS-IS configuration task list
- Configuring IS-IS basic functions
- Configuring IS-IS routing information control
- Configuration prerequisites
- Configuring IS-IS link cost
- Specifying a priority for IS-IS
- Configuring the maximum number of equal cost routes
- Configuring IS-IS route summarization
- Advertising a default route
- Configuring IS-IS route redistribution
- Configuring IS-IS route filtering
- Configuring IS-IS route leaking
- Tuning and optimizing IS-IS networks
- Configuration prerequisites
- Specifying intervals for sending IS-IS hello and CSNP packets
- Specifying the IS-IS hello multiplier
- Configuring a DIS priority for an interface
- Disabling an interface from sending or receiving IS-IS packets
- Enabling an interface to send small hello packets
- Configuring LSP parameters
- Configuring SPF parameters
- Assigning a high priority to IS-IS routes
- Setting the LSDB overload bit
- Configuring system ID to host name mappings
- Enabling the logging of neighbor state changes
- Enhancing IS-IS network security
- Configuring IS-IS GR
- Configuring IS-IS FRR
- Enabling IS-IS SNMP trap
- Binding an IS-IS process with MIBs
- Configuring BFD for IS-IS
- Displaying and maintaining IS-IS
- IS-IS configuration examples
- BGP configuration
- BGP overview
- BGP configuration task list
- Configuring BGP basic functions
- Controlling route generation
- Controlling route distribution and reception
- Configuration prerequisites
- Configuring BGP route summarization
- Advertising a default route to a peer or peer group
- Configuring BGP route distribution/reception filtering policies
- Enabling BGP and IGP route synchronization
- Limiting prefixes received from a peer or peer group
- Configuring BGP route dampening
- Configuring a shortcut route
- Configuring BGP route attributes
- Configuration prerequisites
- Specifying a preferred value for routes received
- Configuring preferences for BGP routes
- Configure the default local preference
- Configuring the MED attribute
- Configuring the next hop attribute
- Configuring the AS-PATH attribute
- Permit local AS number to appear in routes from a peer or peer group
- Disable BGP from considering AS_PATH during best route selection
- Specify a fake AS number for a peer or peer group
- Configure AS number substitution
- Remove private AS numbers from updates to a peer or peer group
- Ignore the first AS number of eBGP route updates
- Tuning and optimizing BGP networks
- Configuration prerequisites
- Configuring the BGP keepalive interval and holdtime
- Configuring the interval for sending the same update
- Configuring BGP soft-reset
- Enabling the BGP ORF capability
- Enabling 4-byte AS number suppression
- Enabling quick eBGP session reestablishment
- Enabling MD5 authentication for TCP connections
- Configuring BGP load balancing
- Forbiding session establishment with a peer or peer group
- Configuring a large scale BGP network
- Configuring BGP GR
- Enabling trap
- Enabling logging of peer state changes
- Configuring BFD for BGP
- Displaying and maintaining BGP
- BGP configuration examples
- Troubleshooting BGP
- IPv6 static routing configuration
- RIPng configuration
- OSPFv3 configuration
- Introduction to OSPFv3
- OSPFv3 configuration task list
- Enabling OSPFv3
- Configuring OSPFv3 area parameters
- Configuring OSPFv3 network types
- Configuring OSPFv3 routing information control
- Tuning and optimizing OSPFv3 networks
- Configuring OSPFv3 GR
- Configuring BFD for OSPFv3
- Displaying and maintaining OSPFv3
- OSPFv3 configuration examples
- Troubleshooting OSPFv3 configuration
- IPv6 IS-IS configuration
- IPv6 BGP configuration
- IPv6 BGP overview
- IPv6 BGP configuration task list
- Configuring IPv6 BGP basic functions
- Configuration prerequisites
- Specifying an IPv6 BGP peer
- Injecting a local IPv6 route
- Configuring a preferred value for routes from a peer or peer group
- Specifying the source interface for establishing TCP connections
- Allowing the establishment of an indirect eBGP connection
- Configuring a description for an IPv6 peer or peer group
- Disabling session establishment to an IPv6 peer or peer group
- Logging IPv6 peer or peer group state changes
- Controlling route distribution and reception
- Configuration prerequisites
- Configuring IPv6 BGP route redistribution
- Configuring IPv6 BGP route summarization
- Advertising a default route to an IPv6 peer or peer group
- Configuring outbound route filtering
- Configuring inbound route filtering
- Configuring IPv6 BGP and IGP route synchronization
- Configuring route dampening
- Configuring IPv6 BGP route attributes
- Tuning and optimizing IPv6 BGP networks
- Configuring a large-scale IPv6 BGP network
- Configuring BFD for IPv6 BGP
- Displaying and maintaining IPv6 BGP
- IPv6 BGP configuration examples
- Troubleshooting IPv6 BGP configuration
- Routing policy configuration
- Introduction to routing policy
- Routing policy configuration task list
- Defining filters
- Configuring a routing policy
- Displaying and maintaining the routing policy
- Routing policy configuration examples
- Troubleshooting routing policy configuration
- Policy-based routing configuration
- Introduction to PBR
- Configuring PBR (using a PBR policy)
- Configuring PBR (using a QoS policy)
- Displaying and maintaining PBR configuration
- PBR configuration examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 467 |
| Size: | 4.50 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Multicast overview
- IGMP snooping configuration
- IGMP snooping overview
- IGMP snooping configuration task list
- Configuring basic functions of IGMP snooping
- Configuring IGMP snooping port functions
- Configuring IGMP snooping querier
- Configuring IGMP snooping proxying
- Configuring an IGMP snooping policy
- Configuration prerequisites
- Configuring a multicast group filter
- Configuring multicast source port filtering
- Configuring the function of dropping unknown multicast data
- Configuring IGMP report suppression
- Setting the maximum number of multicast groups that a port can join
- Configuring multicast group replacement
- Configuring 802.1p precedence for IGMP messages
- Configuring a multicast user control policy
- Enabling the IGMP snooping host tracking function
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping
- Appendix
- PIM snooping configuration
- Multicast VLAN configuration
- Multicast routing and forwarding configuration
- Multicast routing and forwarding overview
- Configuration task list
- Enabling ip multicast routing
- Configuring multicast routing and forwarding
- Displaying and maintaining multicast routing and forwarding
- Configuration examples
- Troubleshooting multicast routing and forwarding
- IGMP configuration
- IGMP overview
- IGMP configuration task list
- Configuring basic IGMP functions
- Adjusting IGMP performance
- Configuring IGMP SSM mapping
- Configuring IGMP proxying
- Displaying and maintaining IGMP
- IGMP configuration examples
- Troubleshooting IGMP
- PIM configuration
- PIM overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring BIDIR-PIM
- Configuring PIM-SSM
- Configuring PIM common features
- Displaying and maintaining PIM
- PIM configuration examples
- Troubleshooting PIM
- MSDP configuration
- MSDP overview
- MSDP configuration task list
- Configuring basic functions of MSDP
- Configuring an MSDP peer connection
- Configuring SA messages related parameters
- Displaying and maintaining MSDP
- MSDP configuration examples
- Troubleshooting MSDP
- MBGP configuration
- MBGP overview
- Protocols and standards
- MBGP configuration task list
- Configuring MBGP basic functions
- Controlling route advertisement and reception
- Prerequisites
- Configuring MBGP route redistribution
- Configure default route redistribution into MBGP
- Configuring MBGP route summarization
- Advertising a default route to an IPv4 MBGP peer or peer group
- Configuring outbound MBGP route filtering
- Configuring inbound MBGP route filtering
- Configuring MBGP route dampening
- Configuring MBGP route attributes
- Tuning and optimizing MBGP networks
- Configuring a large scale MBGP network
- Displaying and maintaining MBGP
- MBGP configuration example
- MLD snooping configuration
- MLD snooping overview
- MLD snooping configuration task list
- Configuring basic functions of MLD snooping
- Configuring MLD snooping port functions
- Configuring MLD snooping querier
- Configuring MLD snooping proxying
- Configuring an MLD snooping policy
- Configuration prerequisites
- Configuring an IPv6 multicast group filter
- Configuring IPv6 multicast source port filtering
- Configuring the function of dropping unknown IPv6 multicast data
- Configuring MLD report suppression
- Setting the maximum number of multicast groups that a port can join
- Configuring IPv6 multicast group replacement
- Configuring 802.1p precedence for MLD messages
- Configuring an IPv6 multicast user control policy
- Enabling the MLD snooping host tracking function
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- Appendix
- IPv6 PIM snooping configuration
- IPv6 multicast VLAN configuration
- IPv6 multicast VLAN overview
- IPv6 multicast VLAN configuration task list
- Configuring IPv6 sub-VLAN-based IPv6 multicast VLAN
- Configuring port-based IPv6 multicast VLAN
- Setting the maximum number of forwarding entries for IPv6 multicast VLANs
- Displaying and maintaining IPv6 multicast VLAN
- IPv6 multicast VLAN configuration examples
- IPv6 multicast routing and forwarding configuration
- MLD configuration
- MLD overview
- MLD configuration task list
- Configuring basic functions of MLD
- Adjusting MLD performance
- Configuring MLD SSM mapping
- Configuring MLD proxying
- Displaying and maintaining MLD
- MLD configuration examples
- Troubleshooting MLD
- IPv6 PIM configuration
- IPv6 PIM overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 BIDIR-PIM
- Configuring IPv6 PIM-SSM
- Configuring IPv6 PIM common features
- Displaying and maintaining IPv6 PIM
- IPv6 PIM configuration examples
- Troubleshooting IPv6 PIM configuration
- IPv6 MBGP configuration
- IPv6 MBGP overview
- IPv6 MBGP configuration task list
- Configuring IPv6 MBGP basic functions
- Controlling route distribution and reception
- Configuration prerequisites
- Injecting a local IPv6 MBGP route
- Configuring IPv6 MBGP route redistribution
- Configuring IPv6 MBGP route summarization
- Advertising a default route to a peer or peer group
- Configuring outbound IPv6 MBGP route filtering
- Configuring inbound IPv6 MBGP route filtering
- Configuring IPv6 MBGP route dampening
- Configuring IPv6 MBGP route attributes
- Tuning and optimizing IPv6 MBGP networks
- Configuring a large scale IPv6 MBGP network
- Displaying and maintaining IPv6 MBGP
- IPv6 MBGP configuration example
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 41 |
| Size: | 562 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring TRILL
- Overview
- Configuration restrictions and guidelines
- TRILL configuration task list
- Enabling TRILL
- Configuring the system ID and nickname for an RB
- Configuring the link type of a TRILL port
- Configuring the DRB priority of a TRILL port
- Configuring the link cost for a TRILL port
- Configuring announcing VLANs and the designated VLAN
- Configuring TRILL timers
- Configuring TRILL LSP parameters and features
- Setting the SPF algorithm parameters
- Configuring TRILL distribution trees
- Configuring TRILL ECMP routes
- Enabling incremental flush for TRILL multicast routing entries
- Configuring a TRILL VR
- Permitting a non-TRILL device to learn the MAC address of the TRILL VR
- Enabling MAC address retaining on TRILL ports
- Enabling logging of TRILL neighbor changes
- Configuring SNMP for TRILL
- Enabling TRILL to forward traffic from EVB S-channels
- Configuring TRILL GR
- Associating a TRILL port with a track entry
- Displaying and maintaining TRILL
- TRILL configuration example
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 25 |
| Size: | 525 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring EVB
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 111 |
| Size: | 1.22 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring ACLs
- QoS overview
- Configuring a QoS policy
- Configuring priority mapping
- Overview
- Priority mapping configuration tasks
- Configuring a priority map
- Configuring a port to trust packet priority for priority mapping
- Changing the port priority of an interface
- Displaying and maintaining priority mapping
- Priority trust mode configuration example
- Priority mapping table and priority marking configuration example
- Configuring traffic policing, GTS, and rate limit
- Configuring queue-based accounting
- Configuring congestion management
- Configuring congestion avoidance
- Configuring traffic filtering
- Configuring priority marking
- Configuring nesting
- Configuring traffic redirecting
- Configuring aggregate CAR
- Configuring class-based accounting
- Appendixes
- Configuring data buffers
- Configuring time ranges
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 188 |
| Size: | 1.87 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- FCoE overview
- FCoE configuration restrictions and guidelines
- Configuring VFC interfaces
- Enabling FCoE
- Configuring VSANs
- Building a fabric
- Overview
- Fabric building configuration task list
- Enabling or disabling the fabric configuration feature
- Setting a fabric name
- Setting the switch priority
- Configuring the allowed domain ID list
- Configuring a domain ID for a switch
- Binding the WWN of an N_Port to an FC address
- Setting fabric timers
- Configuring fabric reconfiguration
- Configuring a VFC interface to reject incoming RCF requests
- Enabling SNMP notifications
- Configuring RSCN aggregation
- Configuring and obtaining FC4 information of nodes
- Displaying and maintaining a fabric
- Fabric building configuration examples
- Configuring FC routing and forwarding
- Overview
- Configuring static FC routes
- Configuring FSPF
- FSPF configuration task list
- Enabling FSPF
- Setting the shortest SPF calculation interval
- Setting the minimum LSR arrival interval
- Setting the minimum LSR refresh interval
- Setting the FSPF cost for an interface
- Setting the hello interval for an interface
- Setting the dead interval for an interface
- Setting the LSR retransmission interval for an interface
- Disabling FSPF for an interface
- Configuring FSPF GR
- Displaying and maintaining FC routing and forwarding
- FC routing configuration examples
- Configuring FC zones
- Overview
- FC zone configuration task list
- Configuring a zoning mode
- Configuring the Pairwise feature
- Configuring zone aliases
- Configuring zones
- Configuring zone sets
- Configuring the default zone policy
- Configuring the zone distribution and merge type
- Configuring a merge control mode
- Enabling hard zoning
- Activating a zone set and distributing it to the entire fabric
- Triggering a complete distribution
- Renaming zone aliases, zones, and zone sets
- Copying zone aliases, zones, and zone sets
- Deleting the zone database
- Enabling SNMP notifications
- Displaying and maintaining FC zones
- FC zone configuration example
- Configuring NPV
- Configuring FIP snooping
- Configuring FCS
- Configuring FDMI
- Configuring FC ping
- Configuring FC tracert
- Comprehensive FCoE configuration examples
- FCoE configuration example (in standalone mode)
- FCoE configuration example (in IRF mode)
- Appendixes
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 413 |
| Size: | 4.00 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring AAA
- Overview
- FIPS compliance
- AAA configuration considerations and task list
- Configuring AAA schemes
- Configuring local users
- Configuring RADIUS schemes
- Configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication servers
- Specifying the RADIUS accounting servers and the relevant parameters
- Specifying the shared keys for secure RADIUS communication
- Setting the username format and traffic statistics units
- Setting the maximum number of RADIUS request transmission attempts
- Setting the status of RADIUS servers
- Specifying the source IP address for outgoing RADIUS packets
- Setting RADIUS timers
- Configuring the accounting-on feature
- Configuring the IP addresses of the security policy servers
- Configuring the Login-Service attribute check method for SSH, FTP, and terminal users
- Enabling SNMP notifications for RADIUS
- Displaying and maintaining RADIUS
- Configuring HWTACACS schemes
- Configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers
- Specifying the shared keys for secure HWTACACS communication
- Setting the username format and traffic statistics units
- Specifying the source IP address for outgoing HWTACACS packets
- Setting HWTACACS timers
- Displaying and maintaining HWTACACS
- Configuring LDAP schemes
- Configuration task list
- Creating an LDAP server
- Configuring the IP address of the LDAP server
- Specifying the LDAP version
- Setting the LDAP server timeout period
- Configuring administrator attributes
- Configuring LDAP user attributes
- Creating an LDAP scheme
- Specifying the LDAP authentication server
- Displaying and maintaining LDAP
- Configuring AAA methods for ISP domains
- Enabling the session-control feature
- Setting the maximum number of concurrent login users
- Displaying and maintaining AAA
- AAA configuration examples
- Troubleshooting RADIUS
- Troubleshooting HWTACACS
- Troubleshooting LDAP
- 802.1X overview
- Configuring 802.1X
- H3C implementation of 802.1X
- Configuration prerequisites
- 802.1X configuration task list
- Enabling 802.1X
- Enabling EAP relay or EAP termination
- Setting the port authorization state
- Specifying an access control method
- Setting the maximum number of concurrent 802.1X users on a port
- Setting the maximum number of authentication request attempts
- Setting the 802.1X authentication timeout timers
- Configuring the online user handshake function
- Configuring the authentication trigger function
- Specifying a mandatory authentication domain on a port
- Configuring the quiet timer
- Enabling the periodic online user re-authentication function
- Displaying and maintaining 802.1X
- 802.1X authentication configuration example
- Configuring MAC authentication
- Overview
- Configuration prerequisites
- Configuration task list
- Enabling MAC authentication
- Specifying a MAC authentication domain
- Configuring the user account format
- Configuring MAC authentication timers
- Setting the maximum number of concurrent MAC authentication users on a port
- Configuring MAC authentication delay
- Displaying and maintaining MAC authentication
- MAC authentication configuration examples
- Configuring portal authentication
- Overview
- Portal configuration task list
- Configuration prerequisites
- Configuring a portal authentication server
- Configuring a portal Web server
- Enabling portal authentication on an interface
- Referencing a portal Web server for an interface
- Controlling portal user access
- Configuring portal detection functions
- Configuring the portal fail-permit function
- Configuring BAS-IP for unsolicited portal packets sent to the portal authentication server
- Enabling portal roaming
- Logging out portal users
- Displaying and maintaining portal
- Portal configuration examples
- Configuring direct portal authentication
- Configuring re-DHCP portal authentication
- Configuring cross-subnet portal authentication
- Configuring extended direct portal authentication
- Configuring extended re-DHCP portal authentication
- Configuring extended cross-subnet portal authentication
- Configuring portal server detection and portal user synchronization
- Troubleshooting portal
- Configuring port security
- Overview
- Configuration task list
- Enabling port security
- Setting port security's limit on the number of secure MAC addresses on a port
- Setting the port security mode
- Configuring port security features
- Configuring secure MAC addresses
- Ignoring authorization information from the server
- Enabling MAC move
- Displaying and maintaining port security
- Port security configuration examples
- Troubleshooting port security
- Configuring password control
- Overview
- FIPS compliance
- Password control configuration task list
- Enabling password control
- Setting global password control parameters
- Setting user group password control parameters
- Setting local user password control parameters
- Setting super password control parameters
- Displaying and maintaining password control
- Password control configuration example
- Managing public keys
- Configuring PKI
- Overview
- FIPS compliance
- PKI configuration task list
- Configuring a PKI entity
- Configuring a PKI domain
- Requesting a certificate
- Aborting a certificate request
- Obtaining certificates
- Verifying PKI certificates
- Specifying the storage path for the certificates and CRLs
- Exporting certificates
- Removing a certificate
- Configuring a certificate access control policy
- Displaying and maintaining PKI
- PKI configuration examples
- Troubleshooting PKI configuration
- Configuring IPsec
- Overview
- IPsec tunnel establishment
- Implementing ACL-based IPsec
- Feature restrictions and guidelines
- ACL-based IPsec configuration task list
- Configuring an ACL
- Configuring an IPsec transform set
- Configuring a manual IPsec policy
- Configuring an IKE-based IPsec policy
- Applying an IPsec policy to an interface
- Enabling ACL checking for de-encapsulated packets
- Configuring the IPsec anti-replay function
- Binding a source interface to an IPsec policy
- Enabling QoS pre-classify
- Enabling logging of IPsec packets
- Configuring the DF bit of IPsec packets
- Configuring IPsec for IPv6 routing protocols
- Configuring SNMP notifications for IPsec
- Displaying and maintaining IPsec
- IPsec configuration examples
- Configuring IKE
- Overview
- FIPS compliance
- IKE configuration prerequisites
- IKE configuration task list
- Configuring an IKE profile
- Configuring an IKE proposal
- Configuring an IKE keychain
- Configuring the global identity information
- Configuring the IKE keepalive function
- Configuring the IKE NAT keepalive function
- Configuring IKE DPD
- Enabling invalid SPI recovery
- Setting the maximum number of IKE SAs
- Configuring SNMP notifications for IKE
- Displaying and maintaining IKE
- IKE configuration examples
- Troubleshooting IKE
- IKE negotiation failed because no matching IKE proposals were found
- IKE negotiation failed because no IKE proposals or IKE keychains are referenced correctly
- IPsec SA negotiation failed because no matching IPsec transform sets were found
- IPsec SA negotiation failed due to invalid identity information
- Configuring SSH
- Overview
- FIPS compliance
- Configuring the device as an SSH server
- Configuring the device as an Stelnet client
- Configuring the device as an SFTP client
- Configuring the device as an SCP client
- Displaying and maintaining SSH
- Stelnet configuration examples
- SFTP configuration examples
- SCP configuration examples
- NETCONF over SSH configuration example with password authentication
- Configuring SSL
- Configuring IP source guard
- Overview
- IP source guard configuration task list
- Configuring the IPv4 source guard feature
- Configuring the IPv6 source guard feature
- Displaying and maintaining IP source guard
- IP source guard configuration examples
- Configuring ARP attack protection
- ARP attack protection configuration task list
- Configuring unresolvable IP attack protection
- Configuring ARP packet rate limit
- Configuring source MAC-based ARP attack detection
- Configuring ARP packet source MAC consistency check
- Configuring ARP active acknowledgement
- Configuring authorized ARP
- Configuring ARP detection
- Configuring ARP scanning and fixed ARP
- Configuring ARP gateway protection
- Configuring ARP filtering
- Configuring MFF
- Configuring crypto engines
- Configuring FIPS
- Overview
- Configuration restrictions and guidelines
- Configuring FIPS mode
- FIPS self-tests
- Displaying and maintaining FIPS
- FIPS configuration examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 10 |
| Size: | 551 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 120 |
| Size: | 1.29 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring Ethernet OAM
- Overview
- Ethernet OAM configuration task list
- Configuring basic Ethernet OAM functions
- Configuring the Ethernet OAM connection detection timers
- Configuring link monitoring
- Configuring the action a port takes after it receives an Ethernet OAM event from the remote end
- Displaying and maintaining Ethernet OAM
- Ethernet OAM configuration example
- Configuring CFD
- Configuring DLDP
- Overview
- Configuration restrictions and guidelines
- DLDP configuration task list
- Configuration prerequisites
- Enabling DLDP
- Setting the interval to send advertisement packets
- Setting the DelayDown timer
- Setting the port shutdown mode
- Configuring DLDP authentication
- Displaying and maintaining DLDP
- DLDP configuration examples
- Configuring VRRP
- Overview
- VRRP standard mode
- Protocols and standards
- Configuring IPv4 VRRP
- IPv4 VRRP configuration task list
- Specifying the IPv4 VRRP version
- Creating a VRRP group and assigning a virtual IP address
- Configuring the router priority, preemptive mode, and tracking function
- Configuring IPv4 VRRP packet attributes
- Enabling SNMP notifications for VRRP
- Disabling an IPv4 VRRP group
- Displaying and maintaining IPv4 VRRP
- Configuring IPv6 VRRP
- IPv4 VRRP configuration examples
- IPv6 VRRP configuration examples
- Troubleshooting VRRP
- Configuring BFD
- Configuring Track
- Overview
- Track configuration task list
- Associating the Track module with a detection module
- Associating the Track module with an application module
- Displaying and maintaining track entries
- Track configuration examples
- VRRP-Track-NQA collaboration configuration example
- Configuring BFD for a VRRP backup to monitor the master
- Configuring BFD for the VRRP master to monitor the uplinks
- Static routing-Track-NQA collaboration configuration example
- Static routing-Track-BFD collaboration configuration example
- VRRP-Track-interface management collaboration configuration example
| Recognized languages: | English |
|---|---|
| Pages: | 306 |
| Size: | 3.23 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Using ping, tracert, and system debugging
- Configuring NTP
- Overview
- Configuration restrictions and guidelines
- Configuration task list
- Enabling the NTP service
- Configuring NTP association modes
- Configuring access control rights
- Configuring NTP authentication
- Configuring NTP optional parameters
- Configuring the local clock as a reference source
- Displaying and maintaining NTP
- NTP client/server mode configuration example
- IPv6 NTP client/server mode configuration example
- NTP symmetric active/passive mode configuration example
- IPv6 NTP symmetric active/passive mode configuration example
- NTP broadcast mode configuration example
- NTP multicast mode configuration example
- IPv6 NTP multicast mode configuration example
- Configuration example for NTP client/server mode with authentication
- Configuration example for NTP broadcast mode with authentication
- Configuring SNTP
- Configuring PTP
- Overview
- Configuring clock nodes
- Configuration task list
- Specifying a PTP standard
- Specifying the clock node type
- Specifying a PTP domain
- Configuring an OC to operate as only a member clock
- Configuring the role of a PTP port
- Configuring the mode for carrying timestamps
- Specifying a delay measurement mechanism for a BC or OC
- Configuring the port type for a TC+OC
- Configuring the interval for sending announce messages
- Specifying the number of announcement intervals before the receiving node stops receiving announce messages
- Configuring the interval for sending Pdelay_Req messages
- Configuring the interval for sending Sync messages
- Configuring the minimum interval for sending Delay_Req messages
- Configuring the MAC address for non-pdelay messages
- Specifying the protocol for encapsulating PTP messages as UDP (IPv4)
- Specifying the source IP address for UDP packets
- Configuring the delay correction value
- Configuring the cumulative offset between the UTC and TAI
- Configuring the correction date of the UTC
- Configuring the parameters of the Bits clock
- Configuring a priority of the clock
- Specifying the system time source as PTP
- Enabling PTP on a port
- Displaying and maintaining PTP
- PTP configuration example (IEEE 1588 Version 2)
- PTP configuration example (IEEE 802.1AS)
- Configuring the information center
- Overview
- FIPS compliance
- Information center configuration task list
- Outputting logs to the console
- Outputting logs to the monitor terminal
- Outputting logs to a log host
- Outputting logs to the log buffer
- Saving logs to the log file
- Managing security logs
- Saving diagnostic logs to the diagnostic log file
- Configuring the maximum size of the trace log file
- Enabling synchronous information output
- Enabling duplicate log suppression
- Disabling an interface from generating link up or link down logs
- Displaying and maintaining information center
- Configuration example for outputting logs to the console
- Configuration example for outputting logs to a UNIX log host
- Configuration example for outputting logs to a Linux log host
- Configuring SNMP
- Configuring RMON
- Configuring NQA
- Overview
- NQA configuration task list
- Configuring the NQA server
- Enabling the NQA client
- Configuring NQA operations on the NQA client
- NQA operation configuration task list
- Configuring the ICMP echo operation
- Configuring the DHCP operation
- Configuring the DNS operation
- Configuring the FTP operation
- Configuring the HTTP operation
- Configuring the UDP jitter operation
- Configuring the SNMP operation
- Configuring the TCP operation
- Configuring the UDP echo operation
- Configuring the voice operation
- Configuring the DLSw operation
- Configuring the path jitter operation
- Configuring optional parameters for the NQA operation
- Configuring the collaboration function
- Configuring threshold monitoring
- Configuring the NQA statistics collection function
- Configuring the saving of NQA history records
- Scheduling the NQA operation on the NQA client
- Configuring NQA templates on the NQA client
- Displaying and maintaining NQA
- NQA configuration examples
- ICMP echo operation configuration example
- DHCP operation configuration example
- DNS operation configuration example
- FTP operation configuration example
- HTTP operation configuration example
- UDP jitter operation configuration example
- SNMP operation configuration example
- TCP operation configuration example
- UDP echo operation configuration example
- Voice operation configuration example
- DLSw operation configuration example
- Path jitter operation configuration example
- NQA collaboration configuration example
- ICMP template configuration example
- DNS template configuration example
- TCP template configuration example
- HTTP template configuration example
- FTP template configuration example
- Configuring port mirroring
- Overview
- Configuring local port mirroring
- Configuring Layer 2 remote port mirroring
- Configuring a remote destination group on the destination device
- Configuring a remote source group on the source device
- Displaying and maintaining port mirroring
- Port mirroring configuration examples
- Configuring flow mirroring
- Configuring sFlow
- Monitoring and maintaining processes
- Configuring EAA
- Configuring CWMP
- Overview
- Configuration task list
- Enabling CWMP from the CLI
- Configuring ACS attributes
- Configuring CPE attributes
- Displaying and maintaining CWMP
- CWMP configuration example
- Configuring NETCONF
- Overview
- FIPS compliance
- NETCONF configuration task list
- Enabling NETCONF over SOAP
- Enabling NETCONF over SSH
- Establishing a NETCONF session
- Subscribing to event notifications
- Locking/unlocking the configuration
- Performing service operations
- Performing the get/get-bulk operation
- Performing the get-config/get-bulk-config operation
- Performing the edit-config operation
- All-module configuration data retrieval example
- Syslog configuration data retrieval example
- Example for retrieving a data entry for the interface table
- Example for changing the value of a parameter
- Saving, rolling back, and loading the configuration
- Filtering data
- Performing CLI operations through NETCONF
- Retrieving NETCONF session information
- Terminating another NETCONF session
- Returning to the CLI
- Appendix
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 19 |
| Size: | 431 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 10 |
| Size: | 512 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 29 |
| Size: | 413 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 67 |
| Size: | 5.39 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Preparing for installation
- Installing the switch
- Installing the switch in a 19-inch rack
- Grounding the switch
- Installing/removing a fan tray
- Installing/removing a power module
- Connecting the power cord
- Verifying the installation
- Accessing the switch for the first time
- Setting up an IRF fabric
- IRF fabric setup flowchart
- Planning IRF fabric setup
- Configuring basic IRF settings
- Connecting the physical IRF ports
- Accessing the IRF fabric to verify the configuration
- Maintenance and troubleshooting
- Appendix A Chassis views and technical specifications
- Appendix B FRUs and compatibility matrixes
- Appendix C Ports and LEDs
- Appendix D Cooling system
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 4 |
| Size: | 68 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 111 |
| Size: | 1.11 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Multicast overview
- IGMP snooping configuration
- IGMP snooping overview
- IGMP snooping configuration task list
- Configuring basic functions of IGMP snooping
- Configuring IGMP snooping port functions
- Configuring IGMP snooping querier
- Configuring IGMP snooping proxying
- Configuring an IGMP snooping policy
- Configuration prerequisites
- Configuring a multicast group filter
- Configuring multicast source port filtering
- Configuring the function of dropping unknown multicast data
- Configuring IGMP report suppression
- Configuring maximum multicast groups that a port can join
- Configuring multicast group replacement
- Configuring 802.1p precedence for IGMP messages
- Configuring a multicast user control policy
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping configuration
- Multicast VLAN configuration
- MLD snooping configuration(available only on the S3100V2-EI)
- MLD snooping overview
- MLD snooping configuration task list
- Configuring basic functions of MLD snooping
- Configuring MLD snooping port functions
- Configuring MLD snooping querier
- Configuring MLD snooping proxying
- Configuring an MLD snooping policy
- Configuration prerequisites
- Configuring an IPv6 multicast group filter
- Configuring dropping unknown IPv6 multicast data
- Configuring MLD report suppression
- Configuring maximum multicast groups that a port can join
- Configuring IPv6 multicast group replacement
- Configuring 802.1p precedence for MLD messages
- Configuring an IPv6 multicast user control policy
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- IPv6 multicast VLAN configuration(available only on the S3100V2-EI)
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 349 |
| Size: | 15.39 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- CLI configuration
- What is CLI?
- Entering the CLI
- Command conventions
- Undo form of a command
- CLI views
- Using the CLI online help
- Typing commands
- Checking command-line errors
- Using command history
- Controlling the CLI display
- Configuring user privilege and command levels
- Saving the current configuration
- Displaying and maintaining CLI
- Login methods
- CLI login
- Overview
- Logging in through the console port
- Introduction
- Configuration requirements
- Login procedure
- Console login authentication modes
- Configuring none authentication for console login
- Configuring password authentication for console login
- Configuring scheme authentication for console login
- Configuring common settings for console login (optional)
- Logging in through telnet
- Introduction
- Telnet login authentication modes
- Configuring none authentication for telnet login
- Configuring password authentication for telnet login
- Configuring scheme authentication for telnet login
- Configuring common settings for VTY user interfaces (optional)
- Configuring the SecBlade card to log in to a telnet server as a telnet client
- Displaying and maintaining CLI login
- Logging in to the SecBlade NS card from the host device
- NMS login
- User login control
- User login control overview
- Configuring login control over telnet users
- Configuring source IP-based login control over NMS users
- Interface configuration
- Ethernet interface overview
- General configuration
- Configuring a combo interface
- Configuring basic settings of an Ethernet interface or subinterface
- Shutting down an Ethernet interface or subinterface
- Configuring flow control on an Ethernet interface
- Configuring loopback testing on an Ethernet interface
- Configuring the link mode of an Ethernet interface
- Configuring a Layer 2 Ethernet interface or subinterface
- Configuring a Layer 3 Ethernet interface or subinterface
- Displaying and maintaining an Ethernet interface or subinterface
- Configuring a loopback interface
- Configuring the null interface
- Displaying and maintaining loopback and null interfaces
- IP addressing configuration
- IP routing basics configuration
- Static routing configuration
- Policy-based routing configuration
- VLAN configuration
- Isolate-user-VLAN configuration
- Layer 2 forwarding configuration
- Configuring general Layer 2 forwarding
- Configuring inline Layer 2 forwarding
- Configuring inter-VLAN Layer 2 forwarding
- MAC address table configuration
- ARP configuration
- Gratuitous ARP configuration
- Proxy ARP configuration
- ACL configuration
- NetStream overview
- IPv4 NetStream configuration
- IPv4 NetStream configuration task list
- Enabling IPv4 NetStream
- Configuring IPv4 NetStream filtering and sampling
- Configuring IPv4 NetStream data export
- Configuring attributes of IPv4 NetStream export data
- Configuring IPv4 NetStream flow aging
- Enabling DSA-TAG field parsing
- Displaying and maintaining IPv4 NetStream
- IPv6 NetStream configuration
- NetStream configuration examples
- Configuration considerations
- Configuring the host device and the SecBlade NS card
- IPv4 NetStream traditional data export configuration example
- IPv4 NetStream aggregation data export configuration example
- Using the sampler for IPv4 NetStream
- IPv6 NetStream traditional data export configuration example
- IPv6 NetStream aggregation data export configuration example
- Device management
- Device management overview
- Configuring the device name
- Configuring and displaying the system time
- Enabling the display of copyright information
- Configuring banners
- Configuring the maximum number of concurrent users
- Configuring the exception handling method
- Rebooting the device
- Configuring a scheduled task
- Configuring temperature alarm thresholds for a card
- Clearing the 16-bit interface indexes not used in the current system
- Identifying and diagnosing pluggable transceivers
- Displaying and maintaining device management
- NTP configuration
- Automatic configuration
- Introduction to automatic configuration
- Typical automatic configuration network
- How automatic configuration works
- FTP configuration
- FTP overview
- Configuring the FTP client
- Configuring the FTP server
- Displaying and maintaining FTP
- TFTP configuration
- File management
- Configuration file management
- Configuration file overview
- Saving the running configuration
- Setting configuration rollback
- Specifying a startup configuration file to be used at the next system startup
- Backing up the startup configuration file
- Deleting a startup configuration file to be used at the next startup
- Restoring a startup configuration file
- Displaying and maintaining a configuration file
- Software upgrade configuration
- Device software overview
- Software upgrade methods
- Software upgrade through a system reboot
- Software upgrade by installing hotfixes
- Displaying and maintaining software upgrade
- Software upgrade configuration examples
- System maintenance and debugging
- Information center configuration
- Information center overview
- Configuring information center
- Information center configuration task list
- Outputting system information to the console
- Outputting system information to a monitor terminal
- Outputting system information to a log host
- Outputting system information to the trap buffer
- Outputting system information to the log buffer
- Outputting system information to the SNMP module
- Outputting system information to the web interface
- Saving system information to a log file
- Managing security logs files
- Configuring synchronous information output
- Disabling a port from generating link up/down logging information
- Displaying and maintaining information center
- Information center configuration examples
- SNMP configuration
- MIB style configuration
- RMON configuration
- H3C network technology acronyms
- Index