H3C Technologies H3C S10500 Series Switches - Manual (Page 18)

12
To do… Use the command… Remarks
Configure the clock
synchronization timer from ACSEI
server to ACSEI client
acsei timer clock-sync minutes
Optional
Five minutes by default.
Configuring the monitoring timer
Follow theses steps to configure the monitoring timer:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Configure the monitoring timer for
ACSEI server to monitor ACSEI
client
acsei timer monitor seconds
Optional
Five seconds by default.
Closing an ACSEI client
Follow these steps to close an ACSEI client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Close the specified ACSEI client acsei client close client-id Required
CAUTION:
This feature is available only for an ACSEI client supporting Linux operating system.
Restarting an ACSEI client
Follow these steps to restart an ACSEI client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Restart the specified ACSEI client acsei client reboot client-id Required