H3C Technologies H3C S6800 Series Switches User Manual
Page 13
9
Table 11 QSFP+ port LED description
LED status
Description
Steady green
A transceiver module is installed in the port. The
port is operating at 40 Gbps, and a link is
present on the port.
Flashing green
The port is sending or receiving data at 40
Gbps.
Steady yellow
A transceiver module is installed in the port. The
port is operating at 10 Gbps, and a link is
present on the port.
Flashing yellow
The port is sending or receiving data at 10
Gbps.
Off
No transceiver module is installed in the port, or
no link is present on the port.
NOTE:
The SFP+ port LEDs and QSFP+ port LEDs are not affected by the
port mode switching button on your switch. For more information
about the port mode switching button, see the installation guide of
the switch.