H3C Technologies H3C S5800 Series Switches - Manual (Page 12)

7
Installing and removing a power module
The installing and removing procedures of the LSVM1AC650 are
similar to the LSVM1DC650. This section takes the LSVM1AC650 for
example.
Installing the power module
To avoid bodily injury or device damage, follow the steps in Figure 3 to
install the power module.
Figure 3 Power module installation procedure
Step1 Put on the ESD-preventive wrist strap, making sure that the strap
makes good skin contact and is well grounded.
Step2 Take the power module out of the package. Make sure that the
power module is of the required model.