EMU Australia E-MU LONGboard 61 - Manual (Page 13)

User’s Guide 13
Set the 2. B/P switch to the (+) position (Paired mode).
Set the 3. R/T switch to the (-) position (Receive).
Set the 4. D/A switch to the (+) position (Analog).
(LONGboard and SHORTboard don’t support digital mode.)
Link Procedure
On the Rear Panel of your Keyboard
Press the 5. Connect button.
On the PIPEline
Press the 6. Link/Connect button. The white LED will stop flashing
when connected.
Play the keyboard.
7. You will hear audio from the PIPEline!
If you change channels, the keyboard and PIPEline will automatically •
re-link. (Of course, the keyboard and PIPEline channels must match!)
If you turn off the keyboard, PIPEline, or both; they will automatically •
re-link when you turn them back on.
You only have to perform the Link procedure again if you decide to link to •
a different PIPEline, or if you decide to change Paired/Broadcasting modes.
Selecting Paired and Broadcasting Modes
The keyboard’s wireless transmitter operates in “paired” mode by default.
Paired mode allows you to link your keyboard with one (and only one)
PIPEline. Broadcasting Mode allows you to link your keyboard to one or
more PIPElines. Please refer to the PIPEline User’s Guide for a detailed
description of these modes. The PIPEline User’s Guide is available at the
E-MU web site:
www.emu.com .
To Switch between Paired and Broadcasting modes:
►
Important: 1. First set the keyboard Channel Select knob to OFF.
To select Broadcasting mode 2. , blip* the Keyboard Link button 7
times.
To select Paired mode, 3. blip* the Keyboard Link button 3 times.
* A “blip” is a quick press/release of the button.