EMU Australia E-MU LONGboard 61 - Manual (Page 22)

22 LONGboard 61 SHORTboard 49
Saving Your Control Settings
The settings of the six control knobs can be saved with the program
allowing you to customize the sound set. Note: Only programs in the
KEYS bank can be saved with modifications. General MIDI programs
cannot be saved.
Set the controls the way you want them. 1.
Press and hold the Select button, then press the Column button 2.
of the current program. Sto appears in the display indicating that
your custom settings have been stored with the program.
To Restore the Factory Knob Settings:
►
To restore all factory defaults, hold the select button and power on. 1.
Select Button
Press this button to cycle
through the editing options,
then adjust the value using the
data slider. These settings affect
all programs and are auto-
matically stored. While in edit
mode (any of the Select LEDs on), programs cannot be selected.
Program
This option allows you to access all 128 program change commands on the
internal synthesizer or an external MIDI synthesizer.
To Select a Program using the Data Slider:
►
Press the 1. Select button repeatedly until the Program LED is lit.
Select the desired program number 2. using the data slider.
The program change command is transmitted a second after you stop 3.
moving the data slider.
Select