H3C Technologies H3C WA2110-AG Wireless LAN Access Point - Manual (Page 10)

4
CAUTION:
•
To ensure that the access point complies with the related authentication
domain regulations, configure the country code by executing the wlan
country-code command on the access controller/unified switch before
the access point begins to operate. For details about the wlan
country-code command, refer to the WLAN Configuration
Commands of the WLAN Command Reference in H3C WX Series
Access Controllers Command References.
•
Check that the voltage range is compliant to the requirements before
powering on the device, and be sure to use power supply devices that
are in compliance with the related safety standards.
WARNING!
Do not use or manipulate your WA2110-AG near any uncovered
exploders or in any other explosive environments, unless otherwise
authorized by related functionaries.
Product Appearance
The following figure shows the appearance of a WA2110-AG.