Maintenance, Power-saving function, Dispose of computer – Panasonic Toughpad FZ-A2 User Manual
Page 17
17
Useful Information
Maintenance
If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately.
Failure to do so may result in staining.
To clean the LCD panel
Use the soft cloth. (For further information, refer to “Suggestions About Cleaning the LCD Sur-
face” è
Operating Instructions - Reference Manual “Maintaining the performance of the
screen”.)
To clean areas other than the LCD panel
Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted
detergent and wring it thoroughly.
CAUTION
l
Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface
causing discoloration, etc. Do not use commercially-available household cleaners and cosmet-
ics, as they may contain components harmful to the surface.
l
Do not apply water or detergent directly to the computer, since liquid may enter inside of the
computer and cause malfunction or damage.
l
Use a soft, dry cloth to wipe droplets of water from the surface of the unit. Do not use a micro-
wave to dry the unit. Doing so will result in malfunction or damage.
Power-Saving Function
When the computer is not operated or accessed for a specified period, the power-saving function
activates and the computer enters sleep mode. This function allows you to reduce power con-
sumption when the computer is not being used while it is turned on.
The power-saving function is enabled under factory default settings. (è
Operating Instruc-
tions - Reference Manual “Important Battery Tips”)
l
To exit sleep mode, press the (power switch).
Dispose of Computer
n
Preparation
l
Remove all peripherals (microSD memory card, etc.).
l
Perform “Factory data reset” to erase the stored data.
<Only for model with Built-in Bridge Battery>
<For Europe and U.S.A./Canada>
Attention Customers
Don't remove the battery by yourself. The battery must be removed by qualified professionals.
When disposing of this product, be sure to contact qualified professionals to remove the battery.